Siemens 6AV7882-0DA40-2BA0 SIMATIC IPC277E Nanopanel PC

Description

This is a Siemens 6AV7882-0DA40-2BA0 SIMATIC IPC277E, a robust Nanopanel PC engineered for industrial human-machine interface (HMI) and embedded control tasks. It features a 15-inch Touch TFT display, an integrated 80 GB Solid-State Drive (SSD), and is powered by an Intel Celeron N2807 processor with 2 GB of RAM. Connectivity is provided through dual Gigabit Ethernet ports, multiple USB interfaces including USB 3.0, a DisplayPort for external monitors, and a serial port. The unit operates on a nominal 24 V DC power supply and comes pre-installed with Windows Embedded Standard 7E SP1 (64-bit), ready for deployment in demanding factory environments. Please note this configuration is supplied without any additional SIMATIC software.

Features

• ■15-inch TFT touchscreen display for operator interaction.
• ■Intel Celeron N2807 dual-core processor.
• ■2 GB RAM with integrated NVRAM for data retention.
• ■80 GB Solid-State Drive (SSD) for fast boot and operation.
• ■Pre-installed Windows Embedded Standard 7E SP1 (64-bit, English).
• ■Dual 10/100/1000 Mbps Ethernet ports for network redundancy or separation.
• ■Comprehensive I/O including USB 3.0, USB 2.0, DisplayPort, and a serial port (COM1).
• ■Integrated CFast card slot for storage expansion.
• ■Front-accessible USB port for convenient data transfer and peripheral connection.

Applications

• ■Human-Machine Interface (HMI) visualization and control.
• ■Process monitoring and data acquisition systems.
• ■Machine-level control panels in manufacturing.
• ■Factory floor automation and data logging.

Technical Specifications

Installation Guidelines

1. 1 De-energize Equipment: Before installation, completely disconnect and lock out all power sources to the control cabinet or panel where the PC will be installed. Verify the absence of voltage.
2. 2 Prepare Panel Cutout: Ensure the mounting cutout in the enclosure meets the dimensional requirements for the IPC277E chassis. Deburr all sharp edges to prevent damage to cables and ensure a proper seal.
3. 3 Mount the Unit: Insert the Panel PC into the cutout from the front. Secure it from the rear using the provided mounting clamps, tightening them evenly to the manufacturer's specified torque to ensure a proper seal and secure fit.
4. 4 Connect Power: Connect the 24 V DC power supply to the designated power terminal. Strictly observe correct polarity (+/-). Use appropriately sized conductors and ensure a secure connection.
5. 5 Establish Ground Connection: Connect the chassis to the control panel's protective earth (PE) busbar using a low-impedance grounding conductor. This is critical for safety and noise immunity.
6. 6 Connect Peripherals: Connect Ethernet cables, USB devices, DisplayPort monitors, and any serial devices as required by the application. Ensure all cables are properly routed and secured to prevent strain.
7. 7 Final Check and Power-Up: After all connections are made and verified, close the control cabinet door. Re-engage the main power supply and power on the Panel PC. Verify that the operating system boots correctly.