Description
This Siemens 6AV7882-0DB50-2BA0 is a SIMATIC IPC277E Nanopanel PC, a compact and robust human-machine interface (HMI) designed for machine-level control and visualization tasks. It features a 15-inch TFT touch display, an Intel Celeron N2930 processor, and is equipped with 4 GB of RAM with NVRAM for non-volatile data storage. The unit operates on a 24 V DC power supply and includes an 80 GB solid-state drive (SSD) pre-loaded with Windows Embedded Standard 7E. Connectivity is provided through dual Gigabit Ethernet ports, multiple USB interfaces including USB 3.0, a DisplayPort, and a serial port.
Features
-
■
15-inch TFT resistive touch display for operator interaction.
-
■
Powered by an Intel Celeron N2930 processor (4 cores, 4 threads).
-
■
Equipped with 4 GB RAM and integrated NVRAM.
-
■
Includes an 80 GB Solid-State Drive (SSD) for storage.
-
■
Dual 10/100/1000 Mbps Ethernet ports for network connectivity.
-
■
Pre-installed with Windows Embedded Standard 7E SP1 (64-bit, English).
-
■
Front-accessible USB port for convenient peripheral connection.
Applications
- • Machine-level visualization and control
- • Data acquisition and logging in industrial environments
- • Process monitoring and operation in manufacturing plants
- • Compact control cabinet and panel-mount installations
Technical Specifications
| Category |
Detail |
| Brand |
Siemens |
| Model |
6AV7882-0DB50-2BA0 |
| Series |
SIMATIC IPC277E (Nanopanel PC) |
| Display |
15-inch Touch TFT |
| Processor |
Intel Celeron N2930 (4 Cores / 4 Threads) |
| Memory |
4 GB RAM with NVRAM |
| Storage |
80 GB SSD |
| Expansion Slot |
1x CFast Slot |
| Ethernet Ports |
2x 10/100/1000 Mbps RJ45 |
| USB Ports |
1x USB 3.0, 3x USB 2.0, 1x Front USB |
| Serial Port |
1x Serial (COM 1) |
| Graphics Port |
1x Display Port |
| Power Supply |
24 V DC |
| Operating System |
Windows Embedded Standard 7E SP1, English, 64-bit |
| Bundled Software |
None (Without SIMATIC Software) |
| Product Lifecycle Status |
Phase-Out |
| Shipping Weight |
4.00 kg |
| Commodity Code |
85371091 |
| ECCN |
5A992 |
| Country of Origin |
Germany (Estimate) |
| Package Dimensions (Calculated) |
45 x 35 x 15 cm |
Installation Guidelines
CRITICAL WARNING: Electrical Hazard. Installation must be performed by qualified personnel only. Failure to de-energize equipment before installation can result in severe injury or death. Always adhere to local Lockout-Tagout (LOTO) procedures.
-
1
De-energize the control cabinet and verify the absence of voltage using a calibrated multimeter. Apply LOTO devices as required.
-
2
Verify the panel cutout dimensions match the IPC277E's mounting requirements. Ensure the mounting surface is clean, flat, and can support the unit's weight.
-
3
Insert the Panel PC into the cutout and secure it evenly using all provided mounting clamps. Do not overtighten the clamps to avoid deforming the bezel.
-
4
Connect the Protective Earth (PE) terminal on the unit to the cabinet's main ground bus using a low-impedance conductor. This is critical for safety and noise immunity.
-
5
Connect the 24 V DC power supply to the designated power connector. Ensure correct polarity (+/-) is observed. Use appropriately sized wiring for the load.
-
6
Connect Ethernet, USB, serial, and DisplayPort cables as required. Ensure all connectors are fully seated. Route cables to prevent strain and interference.
-
7
Perform a final inspection of all connections. Remove LOTO devices and re-energize the cabinet to commission the Panel PC.