Description
This Siemens 6AV7883-7AA20-3EC0 is a SIMATIC HMI IPC 477C PRO, a robust Panel PC designed for demanding industrial environments. It features a 19-inch touch display and is fully protected to an IP65 rating, making it suitable for applications requiring resistance to dust and water ingress. The system is powered by an Intel Celeron M 1.2 GHz processor and is equipped with 2 GB of DDR3 RAM and a 4 GB CompactFlash card for storage. For network connectivity, it includes two 1 Gbit PROFINET (IE) ports. This bundle comes with Windows Embedded Standard 7 pre-installed and includes a license for WinCC flexible RT 128 PT, which supports archives and recipes for advanced HMI functionality.
Features
-
19-inch integrated touch display
-
Full environmental protection with an IP65 rating
-
Intel Celeron M processor operating at 1.2 GHz
-
Equipped with 2 GB of DDR3 RAM
-
Dual 1 Gbit PROFINET (IE) ports for industrial communication
-
Pre-installed with Windows Embedded Standard 7
-
Bundled with WinCC flexible RT 128 PT software license
Applications
-
Machine-level control and process visualization
-
Data logging and acquisition in manufacturing environments
-
Operator control stations on production lines
-
Factory automation and SCADA systems
Technical Specifications
| Specification |
Value |
| Product Identification |
| Brand |
Siemens |
| Model Number |
6AV7883-7AA20-3EC0 |
| Product Family |
SIMATIC HMI IPC 477C PRO |
| Product Type |
Industrial PC |
| PLM Product Phase |
Phase-Out |
| Hardware |
| Processor |
Intel Celeron M 1.2 GHz |
| Memory (RAM) |
2 GB DDR3 |
| Storage |
4 GB CompactFlash (CF) Card |
| Display |
19-inch Touch Display |
| Connectivity |
| Industrial Ethernet |
PROFINET (IE), 2x 1 Gbit |
| USB Ports |
4x USB (Back) |
| Environmental |
| Protection Rating |
IP65 (Fully Protected) |
| Software |
| Operating System |
Windows Embedded Standard 7 (Pre-installed) |
| HMI Software |
WinCC flexible RT 128 PT (incl. Archives and Recipes) |
| Logistics |
| Country of Origin |
Germany (Estimated) |
| Manufacturer |
Siemens |
| Package Dimensions (Calculated) |
100.5 x 36.5 x 27.5 cm |
| Shipping Weight |
11.00 kg |
| Commodity Code |
85371098 |
Installation Guidelines
CRITICAL WARNING: Hazardous voltages are present. Installation must be performed by qualified personnel only. Failure to de-energize equipment before installation can result in severe injury or death.
-
1
Verify that the package contains the correct Panel PC model and inspect for any shipping damage before proceeding.
-
2
Ensure the target control cabinet or panel is completely de-energized and locked out/tagged out (LOTO) according to site safety procedures.
-
3
Mount the Panel PC into the prepared panel cutout, ensuring all mounting clamps are engaged and tightened evenly to maintain the IP65 seal.
-
4
Connect a low-impedance protective earth (PE) or grounding conductor to the designated terminal on the chassis. This is critical for safety and noise immunity.
-
5
Connect PROFINET and USB cables. Ensure proper cable routing and strain relief to prevent disconnection from vibration or accidental pulling.
-
6
Connect the main power supply cable to the unit's power input connector. Verify the supply voltage matches the device's requirements.
-
7
After a final check of all connections, remove LOTO devices and re-energize the cabinet to commission the Panel PC.