Siemens 6DR5110-0NG01-0AA0 Sipart Controllers

Description

The 6DR5110-0NG01-0AA0 is a SIPART PS2 smart electropneumatic positioner engineered for precise control of pneumatic linear and part-turn actuators. This 2-wire device operates on a 4...20mA signal with an integrated HART-interface for digital communication and diagnostics. Featuring a single action control configuration within a durable polycarbonate enclosure, it is designed for standard operating environments without explosion protection. The unit includes an Analog Output Module (AOM) for 4...20 mA analog position feedback, an electrical connection thread of M20x1.5, and a pneumatic connection of G 1/4. Typical industrial applications include process control loops in chemical plants, water treatment facilities, oil and gas processing, and power generation systems requiring accurate valve positioning. It is fully compatible with standard industrial control systems and pneumatic valve actuators.

Features

• Smart electropneumatic positioner for linear and part-turn valve actuators
• 2-wire configuration with 4...20 mA input and HART communication interface
• Single-acting operation with fail-safe depressurization upon power loss
• Integrated Analog Output Module (AOM) for 4...20 mA position feedback
• Rugged polycarbonate enclosure designed for standard industrial environments

Applications

• Process control valve positioning in chemical and petrochemical plants
• Flow and pressure regulation in water and wastewater treatment
• Industrial fluid handling and pipeline automation systems
• Power generation and auxiliary plant control loops

Technical Specifications

Installation Guidelines

• Mount the positioner securely onto the mechanical linkage of the linear or part-turn pneumatic actuator following alignment guidelines.
• Connect the pneumatic supply lines to the G 1/4 connection ports using clean, filtered instrument air.
• Run the control wiring through the M20x1.5 electrical entry and connect the 4...20 mA current loop with HART communication.
• Verify proper positioning feedback calibration via the Analog Output Module (AOM) and execute initial commissioning initialization.