Siemens 6ES7647-5AG00-2HX0 SIMATIC Box PC 620 Industrial PC

Description

The Siemens 6ES7647-5AG00-2HX0 is a SIMATIC Box PC 620 industrial computer designed for robust operation in automation environments. This unit features an onboard AGP graphics controller with configurable memory, a 10/100 Mbit/s Ethernet interface, and a PC Card (PCMCIA Type 3) slot for expansion. It includes essential industrial features such as a watchdog timer and temperature monitoring. Processing power is provided by a Celeron 566 MHz processor, complemented by 64 MB of SDRAM-133 RAM and a 40 GB EIDE hard disk drive. Connectivity options include two USB ports, PROFIBUS/MPI, and TTY interfaces, along with PCI and ISA/PCI expansion slots. The unit is powered by a 24 V DC industry power supply and comes with Windows 98 SE German pre-installed.

Features

• AGP Graphics Onboard with 8/16/32 MB configurable memory
• 10/100 Mbit/s Ethernet via RJ45 interface
• PC Card (PCMCIA Type 3) slot
• Integrated Watchdog and Temperature Monitoring functions
• 2 x USB ports
• 1 x PCI expansion slot
• 1 x ISA/PCI free expansion slot
• Celeron 566 MHz Processor with 128 KB SLC cache
• PROFIBUS/MPI 12 Mbit/s communication interface
• TTY interface
• 40 GB EIDE Hard Disk Drive
• 64 MB SDRAM-133 RAM
• 1.44 MB, 3.5" Floppy Drive
• 24 V DC, 85 A Industry Power Supply
• Pre-installed Windows 98 SE German (without expansion)

Applications

The Siemens SIMATIC Box PC 620 is suitable for a wide range of industrial applications requiring a reliable and compact computing platform. Typical uses include:

• Machine control and visualization systems
• Process data acquisition and monitoring
• Operator interface (HMI) solutions
• Industrial networking and communication gateways
• Embedded control systems in manufacturing and automation

Technical Specifications

Connections / Interfaces

Installation Guidelines

1. De-energize System: Before installation, ensure all power to the system and associated equipment is disconnected and locked out.
2. Mounting: Securely mount the Box PC in a suitable industrial enclosure or rack, ensuring adequate ventilation and clearance for cable routing and maintenance.
3. Power Connection: Connect the 24 V DC power supply to the designated power input terminals, observing correct polarity. Verify the power supply can provide the required 85 A current.
4. Grounding: Establish a proper protective earth (PE) connection to the chassis of the Box PC to ensure electrical safety and minimize electromagnetic interference.
5. Peripheral Connections: Connect necessary peripherals such as display monitors, keyboards, and mice to the appropriate USB or other interface ports.
6. Network Connections: Connect Ethernet cables to the RJ45 port for network communication. For PROFIBUS/MPI and TTY, connect the respective communication cables.
7. Expansion Cards: If using expansion cards, carefully insert them into the available PCI or ISA/PCI slots, ensuring they are properly seated and secured.
8. Cable Management: Route all cables neatly and securely, separating power and signal cables where possible to reduce interference. Use cable ties or clamps as needed.
9. Environmental Check: Ensure the operating environment meets the specified temperature and humidity ranges for industrial PCs to prevent premature failure.
10. Power Up: Once all connections are verified, re-energize the system and monitor for proper boot-up and operation.