Description
The Siemens 6ES7647-5GF30-0XX0 is an industrial computer from the SIMATIC BOX PC 620 series, designed for robust performance in demanding automation environments. This unit is configured with a Pentium III 1.26 GHz processor, 512 MB of SRAM, and an 80 GB EIDE hard drive for data storage and application hosting. It provides versatile connectivity through integrated 10/100 Mbit/s Ethernet, PROFIBUS/MPI, and USB ports. The system includes onboard AGP graphics and features expansion capabilities with one PCI and one shared ISA/PCI slot, making it suitable for a range of control, visualization, and data acquisition tasks.
Features
- Equipped with an Intel Pentium III 1.26 GHz processor
- 512 MB SRAM-133 system memory
- Onboard AGP graphics with configurable memory (8, 16, or 32 MB)
- Integrated 10/100 Mbit/s Ethernet (RJ45) interface
- Built-in PROFIBUS/MPI and TTY serial interfaces
- System monitoring via integrated watchdog timer and temperature sensors
- Includes one PC Card (PCMCIA Type 3) slot
- Expansion via one PCI and one shared ISA/PCI slot
- Internal 110/230V industrial power supply with NAMUR compliance
Applications
- Process visualization (HMI) and SCADA nodes
- Data acquisition, logging, and archiving
- PC-based control systems
- Industrial gateway and communication server
- Manufacturing Execution Systems (MES) interface
Technical Specifications
| Category |
Specification |
| General |
|
| Brand |
Siemens |
| Model |
6ES7647-5GF30-0XX0 |
| Series |
SIMATIC BOX PC 620 |
| Product Type |
Industrial PC |
| PLM Status |
Obsolete |
| Processor |
|
| CPU |
Pentium III |
| Clock Speed |
1.26 GHz |
| Front Side Bus (FSB) |
133 MHz |
| Cache |
512 KB SLC |
| Memory & Storage |
|
| System Memory (RAM) |
512 MB SRAM-133 |
| Graphics |
Onboard AGP, 8/16/32 MB configurable |
| Hard Drive |
80 GB EIDE |
| Optical Drive |
24x CD-ROM (ATAPI Interface) |
| Floppy Drive |
3.5 inch, 1.44 MB |
| Interfaces & Expansion |
|
| Ethernet |
1 x 10/100 Mbit/s (RJ45) |
| Fieldbus |
1 x PROFIBUS/MPI |
| Serial |
1 x TTY |
| USB |
2 x USB ports |
| Expansion Slots |
1 x PCI, 1 x ISA/PCI (shared) |
| PC Card |
1 x PCMCIA Type 3 |
| Power Supply |
|
| Input Voltage |
110/230V AC |
| Type |
Industrial Power Unit with NAMUR |
| Logistics |
|
| Manufacturer |
Siemens |
| Country of Origin |
Germany (Estimate) |
| Package Dimensions (Calculated) |
45.0 x 47.5 x 27.0 cm |
| Shipping Weight |
7.05 kg |
| Commodity Code |
85371091 |
| ECCN |
4A994 |
Installation Guidelines
CRITICAL WARNING: RISK OF ELECTRIC SHOCK
Installation, wiring, and maintenance must be performed exclusively by qualified electrical personnel. Always de-energize the system and apply Lockout/Tagout (LOTO) procedures before accessing internal components. Failure to comply can result in severe injury or death.
-
1
Ensure the mounting location provides adequate ventilation for heat dissipation and is free from excessive vibration and contaminants.
-
2
Securely mount the Box PC chassis within the control cabinet or panel using appropriate mounting hardware.
-
3
Connect the chassis to a verified protective earth (PE) ground point using a low-impedance conductor to ensure electrical safety and noise immunity.
-
4
Connect the 110/230V AC power supply using the provided power cable. Verify that the source voltage matches the power supply rating before connection.
-
5
Terminate network (RJ45), PROFIBUS/MPI, and any other required I/O cables. Ensure proper shielding and grounding practices are followed for all communication cables.
-
6
If required, install PCI or ISA expansion cards into the appropriate slots, ensuring they are fully seated and secured.
-
7
After verifying all connections, re-energize the system and proceed with operating system installation and software configuration.