Siemens 6ES7647-7BG20-2XX0 SIMATIC IPC427C Microbox PC

Description

This device is a Siemens 6ES7647-7BG20-2XX0 SIMATIC IPC427C, a compact and robust Microbox PC designed for industrial automation applications. It is equipped with an Intel Core 2 Solo 1.2 GHz processor, featuring an 800 MHz FSB and 3 MB SLC for reliable performance. This configuration includes 1 GB of DDR3 1066 SODIMM memory and a user-accessible, replaceable 2 GB CompactFlash card for storage. For network connectivity, it features an integrated 3-port PROFINET interface. This unit is supplied without a pre-installed operating system, allowing for custom software deployment.

Features

• Processor: Intel Core 2 Solo at 1.2 GHz
• Memory: 1 GB DDR3 1066 SODIMM
• Storage: 2 GB replaceable CompactFlash card
• Industrial Networking: Integrated 3-port PROFINET interface
• Form Factor: Compact, fanless Microbox design
• Operating System: Not included

Applications

• Machine-level data acquisition and processing
• Human-Machine Interface (HMI) and SCADA applications
• Communication gateway between different fieldbus networks
• Process control and monitoring in manufacturing environments
• Embedded control systems requiring PC-based architecture

Technical Specifications

Installation Guidelines

1. 1 Site Preparation: Ensure the mounting location inside the control cabinet is clean, dry, and free from excessive vibration. Verify adequate clearance around the unit for heat dissipation as per the device's mounting orientation requirements.
2. 2 Mounting: Securely fasten the IPC427C to a standard DIN rail or directly to the panel backplane using the appropriate mounting hardware. Ensure the unit is mechanically stable.
3. 3 Grounding: Connect a low-impedance protective earth (PE) conductor to the designated grounding terminal on the IPC chassis. Proper grounding is essential for noise immunity and safety.
4. 4 Power Connection: Connect the specified DC power supply to the power input terminals. Verify correct voltage and polarity before applying power. Use appropriately sized conductors and ensure connections are torqued correctly.
5. 5 Interface Cabling: Connect PROFINET and any other required interface cables (e.g., USB, display). Ensure all cables are properly shielded and routed away from high-voltage lines to minimize electrical noise interference.
6. 6 System Commissioning: After verifying all connections, remove the LOTO and apply power to the cabinet. Proceed with operating system installation and application software configuration.