Description
The Siemens 6ES7647-7BL30-0XX0 is a compact, fanless SIMATIC IPC427C series Microbox PC designed for demanding automation tasks. This embedded industrial computer is configured with an Intel Core 2 Duo 1.2 GHz processor, 2 GB of DDR3 RAM, and an integrated PROFINET interface with 3 ports. This specific model is supplied without any internal drives or a pre-installed operating system, offering a flexible hardware base for custom software deployments and control applications. Its robust, maintenance-free design makes it suitable for installation directly at the machine level or within control cabinets.
Features
- Processor: Intel Core 2 Duo running at 1.2 GHz
- Memory: 2 GB DDR3 1066 SODIMM
- Networking: Integrated PROFINET controller with 3 RJ45 ports
- Storage: Supplied without internal or swappable drives
- Operating System: Not included
- Design: Compact and fanless Microbox PC form factor
- Product Lifecycle: Designated as a Phase-Out product
Applications
- Machine-level data processing and control
- HMI and visualization tasks
- Communication gateway between different network protocols
- Data logging and acquisition systems
- Embedded control solutions in manufacturing and process automation
Technical Specifications
| Specification |
Value |
| Brand |
Siemens |
| Model |
6ES7647-7BL30-0XX0 |
| Series |
SIMATIC IPC427C |
| Product Type |
Microbox PC |
| Processor |
Intel Core 2 Duo, 1.2 GHz, 800 MHz FSB, 3 MB SLC |
| Memory |
2 GByte DDR3 1066, SODIMM |
| Networking |
PROFINET (3 Ports) |
| Hardware Expansions |
Without expansions |
| Swappable Drive Bay |
Replaceable, without drive |
| Internal Drive |
Without internal drive |
| Operating System |
Without operating system |
| Product Lifecycle Status |
Phase-Out |
| Shipping Weight |
3.25 kg |
| Commodity Code |
85371091 |
| ECCN |
5A992 |
| Country of Origin |
Germany (Estimated) |
| Package Dimensions (Calculated) |
76.0 x 22.0 x 5.0 cm |
Installation Guidelines
CRITICAL WARNING: Electrical Hazard. Installation must be performed by qualified personnel only. De-energize all power sources and implement Lockout/Tagout (LOTO) procedures before handling, installing, or servicing this equipment. Failure to comply can result in severe injury or death.
-
1
Verify the part number 6ES7647-7BL30-0XX0 matches the project requirements. Inspect the unit for any signs of shipping damage.
-
2
Mount the Microbox PC securely onto a DIN rail or panel surface inside a suitable enclosure that provides protection against environmental factors. Ensure adequate clearance for ventilation and cable access.
-
3
Connect the chassis to the cabinet's protective earth (PE) busbar using a low-impedance grounding conductor. A proper ground connection is essential for safety and noise immunity.
-
4
Connect the 24V DC power supply to the designated power input terminals. Verify correct polarity before applying power. Use appropriately sized wiring for the load.
-
5
Connect PROFINET and any other required communication cables. Ensure all connectors are fully seated and secured. Use shielded cables for industrial network connections.
-
6
After verifying all connections are correct and secure, remove LOTO devices and apply power to the unit. Proceed with operating system installation and software configuration.