Siemens 6ES7718-1CC04-0CC3 SIMATIC Field PG M6 Advanced Field Programming Device

Description

The Siemens 6ES7718-1CC04-0CC3 is a SIMATIC Field PG M6 Advanced model, a ruggedized portable computer designed for commissioning, servicing, and maintaining industrial automation systems. This configuration is equipped with a high-performance Intel Core i7-8850H 6-core processor, 32 GB of DDR4 RAM, and a large 2 TB SSD for demanding engineering applications. It features a 15.6-inch Full HD display and includes a comprehensive suite of pre-installed TIA Portal software licenses, including STEP 7 Professional, WinCC Advanced, and Safety Advanced. This unit is specified with a USA power plug and a QWERTZ/QWERTY keyboard layout, and is supplied without an S5 interface or S5-EPROMMER.

Features

• Processor: Intel Core i7-8850H (6 Cores, 9 MB Smart Cache, 2.6 to 4.3 GHz)
• Memory: 32 GB DDR4 SD-RAM (2 x 16 GB SO-DIMM)
• Storage: 2 TB SATA Solid-State Drive (2.5-inch)
• Display: 15.6-inch Full HD (1920x1080)
• Connectivity: WLAN 802.11ac and Bluetooth V5.0
• Optical Drive: DVD+/-RW
• Operating System: Windows 10 Pro or Windows 11 Pro (64-bit)
• Included Software: STEP 7 Professional, WinCC Advanced, and Safety Advanced combo licenses (V15.1)

Applications

• Commissioning and startup of PLC, HMI, and drive systems
• On-site diagnostics and troubleshooting of automated machinery
• Mobile engineering workstation for TIA Portal projects
• Program development, modification, and backup in the field
• Servicing and maintenance of industrial control panels

Technical Specifications

Installation Guidelines

1. 1 Upon receipt, carefully inspect the Field PG and its accessories for any signs of physical damage that may have occurred during transit. Do not power on if damage is found.
2. 2 Use only the supplied USA power cord and AC adapter. Connecting to an incorrect voltage or using a non-approved power supply can cause permanent damage to the device.
3. 3 Connect the AC adapter to a properly grounded (earthed) electrical outlet to ensure electrical safety and minimize the risk of electrical noise affecting communication.
4. 4 Power on the device and allow the operating system to load completely. Verify that the pre-installed Siemens software licenses are active and accessible.
5. 5 Before connecting to any plant network or controller, ensure the Field PG's network settings are correctly configured to avoid IP address conflicts. It is recommended to perform a full backup of the target controller's program before making any changes.