Siemens SIMATIC IPC427C 6ES7647-7BJ40-2DD0 Microbox PC

Description

This is a Siemens SIMATIC IPC427C 6ES7647-7BJ40-2DD0, a compact industrial computer designed for demanding automation, visualization, and data processing tasks in industrial environments. This specific configuration features an Intel Core 2 Duo 1.2 GHz processor, 4 GB of DDR3 RAM, and a dual-storage system comprising a 50 GB high-endurance SATA Solid-State Drive (SSD) and a replaceable 2 GB CompactFlash card. The unit is delivered with Windows 7 Ultimate MUI pre-installed, providing a ready-to-deploy platform for control and HMI applications.

Features

• Equipped with an Intel Core 2 Duo 1.2 GHz processor with 800 MHz FSB.
• Configured with 4 GB of DDR3 1066 SODIMM system memory.
• Features a 50 GB high-endurance SATA SSD for robust performance.
• Includes a user-accessible, replaceable 2 GB CompactFlash card.
• Pre-installed with Windows 7 Ultimate MUI operating system.
• Designed as a Microbox PC for space-constrained installations.

Applications

• Machine-level control and data acquisition systems.
• Human-Machine Interface (HMI) and SCADA visualization nodes.
• Industrial communication gateways and protocol converters.
• Embedded computing platforms in manufacturing and process control.

Technical Specifications

Installation Guidelines

1. 1 De-energize System: Before installation, completely de-energize the control cabinet or mounting location. Apply Lockout/Tagout (LOTO) procedures to prevent accidental power-up.
2. 2 Mount the IPC: Securely fasten the Microbox PC to a standard DIN rail or a flat panel surface within the enclosure. Ensure adequate clearance around the unit for convective cooling and cable access.
3. 3 Connect Chassis Ground: Connect a low-impedance protective earth (PE) conductor to the designated chassis ground terminal on the IPC. This is critical for electrical safety and noise immunity.
4. 4 Connect Power Supply: Connect the 24V DC power source to the power input terminals. Verify correct polarity (+/-) before applying power to prevent damage to the unit.
5. 5 Connect Peripherals: Connect all necessary network (Ethernet), display, and I/O cables. Ensure all connectors are fully seated and secured.
6. 6 System Power-Up: After verifying all connections, remove LOTO devices and re-energize the cabinet. Monitor the IPC for a successful boot sequence and operating system load.