Beckhoff ZB7304-0100 is a 10.00 m EtherCAT P hybrid cable for combined Ethernet communication and power distribution. It uses five 4.0 mm² power conductors plus one four-core AWG22 Ethernet element in a drag-chain-suitable PUR jacket.
Technical specifications
| Manufacturer |
Beckhoff Automation |
| Order number |
ZB7304-0100 |
| Supplied length |
10.00 m |
| Product type |
EtherCAT P hybrid cable, supplied by the metre/length |
| Power conductors |
5 × 4.0 mm² (approximately AWG12) |
| Ethernet element |
1 × 4 × 0.34 mm² (AWG22) |
| Operating voltage |
Up to 1000 V AC |
| Jacket |
PUR, black with red stripe; halogen-free |
| Outer diameter |
15.0 mm ± 0.2 mm |
| Minimum bend radius |
7 × OD in motion; 4 × OD for fixed installation |
| Dynamic rating |
Up to 3 million drag-chain cycles under the specified test conditions |
Selection and installation checks
- Confirm the exact ZB7304 conductor arrangement; other EtherCAT P cable families use smaller power conductors and different outside diameters.
- The -0100 suffix identifies a 10 m length. Verify routing length before termination and retain allowance for bend radius and strain relief.
- Observe the required separation, shielding and connector-assembly practices for the installed EtherCAT P equipment.
- Do not exceed the cable-chain bending radius or use a fixed-installation bend figure for continuous motion.
Dimensions and shipping
Supplied length is 10.00 m and nominal outside diameter is 15.0 mm. Estimated coiled package: 45 × 45 × 20 cm. Estimated shipping weight: 4.5 kg. The package and gross mass are planning estimates; confirm the finished coil and carton before air shipment.