Siemens 6AV7613-0AB20-0CJ0 SIMATIC Panel PC 670

Description

This is a SIMATIC Panel PC 670 from Siemens, model 6AV7613-0AB20-0CJ0, designed for industrial human-machine interface (HMI) applications. The unit features a 12-inch TFT display and is equipped with a 300 MHz Celeron CPU, 128 MB of RAM, and a 20 GB hard drive. It includes an integrated CD-ROM drive and comes pre-installed with the Windows NT 4.0 operating system in English. This configuration is powered by a 115-230V AC supply and includes a European mains cable.

Features

• ■12-inch TFT color display for process visualization.
• ■Intel Celeron processor operating at 300 MHz.
• ■128 MB of installed RAM.
• ■20 GB hard drive for application and data storage.
• ■Integrated CD-ROM drive for software installation.
• ■Pre-loaded with Windows NT 4.0 (English).
• ■Wide input voltage range of 115-230V AC.

Applications

• ■Machine-level operator control and monitoring.
• ■Process visualization and data acquisition systems.
• ■Factory automation and control panels.
• ■Legacy system replacement and maintenance.

Technical Specifications

Installation Guidelines

1. 1
   Verify Panel Cutout: Before installation, ensure the control cabinet panel cutout dimensions precisely match the requirements for the PC670 housing to ensure a proper fit and environmental seal.
2. 2
   Mounting: Insert the Panel PC into the cutout from the front of the cabinet. Secure it from the rear using all provided mounting clamps, tightening them evenly to the manufacturer's specified torque to prevent chassis distortion.
3. 3
   Grounding: Connect a dedicated, low-impedance protective earth (PE) conductor to the designated grounding terminal on the Panel PC chassis. This is critical for both safety and noise immunity.
4. 4
   Power Connection: Connect the provided mains cable to a stable, correctly rated AC power source (115-230V). Ensure the power source is protected by an appropriate circuit breaker or fuse.
5. 5
   I/O and Communication Cabling: Connect all required communication and I/O cables. Route cables away from high-voltage lines and sources of electromagnetic interference (EMI). Use shielded cables for all data communication lines.