Siemens 6AV7892-0DG10-0AC0 SIMATIC IPC677C Panel PC

Description

This Siemens 6AV7892-0DG10-0AC0 is a SIMATIC HMI IPC677C Panel PC, engineered for demanding visualization and control tasks in industrial environments. It integrates a high-performance computer with a responsive operator interface, featuring a 15-inch touch display with 1024x768 resolution. The system is powered by an Intel Core i7-610E processor and is equipped with 2 GB of DDR3 RAM and a 250 GB SATA HDD for application and data storage. Integrated system monitoring for watchdog, temperature, and fan functions ensures operational reliability, while an onboard RAID controller provides options for data redundancy.

Features

• Processor: Intel Core i7-610E (2C/4T, 2.53 GHz, 4 MB Cache)
• Memory: 2 GB DDR3 1066 DIMM
• Storage: 250 GB SATA Hard Disk Drive (HDD)
• Display: 15-inch touch screen with 1024 x 768 resolution
• Operating System: Windows 7 Ultimate 32-bit SP1 (MUI)
• Connectivity: 2x 10/100/1000 Mbit/s Ethernet, 4x USB 2.0, 1x Serial (COM1)
• Expansion: Two free PCI slots
• System Integrity: Onboard watchdog, temperature, and fan monitoring

Applications

• Human-Machine Interface (HMI) for process control and visualization
• Data acquisition and logging in manufacturing environments
• Machine-level control and monitoring stations
• Supervisory control nodes in smaller SCADA systems

Technical Specifications

Installation Guidelines

1. 1 Prepare the panel cutout according to the manufacturer's dimensional drawings. Ensure the mounting surface is clean, flat, and rigid enough to support the unit's weight.
2. 2 Insert the Panel PC into the cutout from the front. Secure it from the rear using the provided mounting clamps, tightening them evenly to the specified torque to ensure a proper seal.
3. 3 Connect a low-impedance protective earth (PE) ground to the designated chassis terminal. This is critical for both safety and noise immunity.
4. 4 Connect the AC power supply cable to a stable, correctly rated power source. Route power cables separately from signal and communication cables to prevent electromagnetic interference.
5. 5 Connect Ethernet, USB, and serial communication cables as required by the application. Ensure all connectors are fully seated and secured.