Siemens 6AV7894-0HD10-0AB0 SIMATIC IPC677C Panel PC

Description

The Siemens 6AV7894-0HD10-0AB0 is a SIMATIC IPC677C Panel PC designed for robust human-machine interface (HMI) and control applications in industrial environments. This unit integrates a 19-inch touch display with a 1280x1024 resolution and is powered by an Intel Core i3-330E processor. It is equipped with 2 GB of DDR3 RAM and a 250 GB SATA hard drive for application and data storage. Key features include dual Gigabit Ethernet ports for network connectivity, an onboard RAID controller for data redundancy, and integrated monitoring for watchdog, temperature, and fan status to ensure operational reliability. The device is pre-installed with Windows XP Professional SP3 and is powered by a 110/230 V AC supply.

Features

• 19-inch touch display with 1280 x 1024 resolution
• Intel Core i3-330E processor (2.13 GHz, 3 MB Cache)
• Onboard RAID controller for enhanced data integrity
• Integrated system monitoring for watchdog, temperature, and fan
• Dual 10/100/1000 Mbit/s Ethernet ports
• Convenient front-side USB port
• Two free PCI slots for hardware expansion

Applications

• Process visualization and control
• Data acquisition and logging
• Machine-level HMI stations
• Factory automation control rooms
• Industrial SCADA systems

Technical Specifications

Installation Guidelines

1. 1 Panel Cutout: Prepare the control cabinet or panel cutout according to the manufacturer's dimensional drawings. Ensure the mounting surface is flat, clean, and can support the weight of the unit.
2. 2 Mounting: Insert the Panel PC into the cutout from the front. Secure it from the rear using all provided mounting clamps. Tighten the clamps evenly to the specified torque to ensure a proper seal and prevent bezel distortion.
3. 3 Grounding: Connect the protective earth (PE) terminal on the PC chassis to the main grounding point of the control cabinet using a low-impedance conductor. A reliable ground connection is critical for safety and noise immunity.
4. 4 Power Connection: Connect the 110/230 V AC power supply cable to a stable, correctly rated power source. Ensure the power source is protected by an appropriate circuit breaker or fuse.
5. 5 I/O Connections: Connect Ethernet, USB, and serial cables as required. Route all cables away from high-voltage lines and sources of electromagnetic interference (EMI). Use shielded cables for communication lines where specified.