Siemens 6ES7647-7BF20-2AM0 SIMATIC IPC427C Microbox PC

Description

This is a Siemens 6ES7647-7BF20-2AM0 SIMATIC IPC427C, a compact and robust Microbox PC designed for demanding machine-level automation tasks. It is configured with an Intel Core 2 Solo 1.2 GHz processor, 1 GB of DDR3 RAM, and an integrated PROFIBUS DP/12 interface for field-level communication. Storage is provided by a removable 2 GB CompactFlash card and a non-accessible 320 GB SATA HDD. The unit comes with Windows Embedded Standard 2009 pre-installed. Please note that this product is in the 'Phase-Out' stage of its lifecycle.

Features

• Processor: Intel Core 2 Solo at 1.2 GHz with 800 MHz FSB
• Memory: 1 GB DDR3 1066 SODIMM
• Primary Storage: 2 GB replaceable CompactFlash card
• Secondary Storage: 320 GB internal SATA Hard Disk Drive
• Fieldbus Communication: Integrated PROFIBUS DP/12 port
• Operating System: Windows Embedded Standard 2009 pre-installed
• Form Factor: Compact Microbox for space-constrained installations

Applications

• Machine-level data acquisition and control
• Human-Machine Interface (HMI) and visualization tasks
• Protocol conversion and gateway functions
• Embedded control systems in manufacturing and processing
• Compact automation solutions requiring PC-based architecture

Technical Specifications

Installation Guidelines

1. 1 Ensure the control cabinet is fully de-energized and locked out according to site safety procedures before beginning installation.
2. 2 Verify the intended mounting orientation and ensure adequate clearance for ventilation to maintain optimal operating temperatures.
3. 3 Securely mount the Microbox PC onto the DIN rail or mounting plate inside the enclosure.
4. 4 Connect a low-impedance protective earth (PE) or system ground connection to the designated terminal on the IPC chassis.
5. 5 Connect the PROFIBUS DP cable and any other required communication or I/O cables. Ensure proper cable shielding is terminated correctly to minimize electrical noise.
6. 6 Connect the 24V DC power supply, observing correct polarity. After verifying all connections, remove the lockout and re-energize the cabinet to commission the device.