Siemens SIMATIC Panel PC 670 6AV7611-0AA20-0CJ0 Panel PC

Description

The Siemens 6AV7611-0AA20-0CJ0 is a SIMATIC Panel PC 670 designed for industrial human-machine interface (HMI) and control applications. This unit features a 10-inch TFT display and is equipped with an Intel Celeron 300 MHz processor, 128 MB of RAM, and a 20 GB hard drive. It is configured to operate on a 115-230V AC power supply and comes pre-installed with the Windows NT 4.0 English operating system. This model is a legacy component, noted as an obsolete product in the product lifecycle management phase, suitable for maintaining existing systems.

Features

• Integrated 10-inch TFT color display
• Powered by an Intel Celeron 300 MHz CPU
• Includes 128 MB of system RAM
• Equipped with a 20 GB internal hard drive
• Pre-loaded with Microsoft Windows NT 4.0 (English version)
• Wide input voltage range of 115-230V AC
• Supplied with a European mains power cable

Applications

• Process visualization and control
• Supervisory Control and Data Acquisition (SCADA) nodes
• Machine-level data logging and diagnostics
• Factory automation and assembly line monitoring
• Replacement unit for existing SIMATIC PC 670 installations

Technical Specifications

Installation Guidelines

1. 1 Verify that the panel cutout dimensions match the PC 670 specifications for a secure fit. Ensure the mounting surface is clean, flat, and can support the unit's weight.
2. 2 Insert the Panel PC into the cutout from the front of the enclosure. Secure it from the rear using the provided mounting clamps, tightening them evenly to the manufacturer's recommended torque to ensure a proper seal.
3. 3 Connect a dedicated protective earth (PE) conductor to the designated grounding terminal on the chassis. A low-impedance ground connection is essential for safety and noise immunity.
4. 4 Connect the 115-230V AC power supply using the provided mains cable. Ensure the source voltage is stable and within the specified range. Route power cables separately from signal and communication lines.
5. 5 Connect all required peripheral and communication cables (e.g., Ethernet, serial, USB) to their respective ports. Ensure all connectors are fully seated and secured.
6. 6 After all connections are verified, remove the lockout/tagout device and re-energize the main power supply to the enclosure. Power on the Panel PC and confirm proper boot-up and operation.