Bently Nevada 330102-00-28-10-02-00 3300 XL 8 mm Proximity Probe with Armor

Description

330102-00-28-10-02-00 is a 3300 XL 8 mm proximity probe with 3/8-24 UNF threads and flexible stainless steel armor, configured with 0.0 in unthreaded length, 2.8 in case length, 1.0 m total length, ClickLoc connector, and standard cable.

This armored configuration features a 2.8 in overall case length (Option 28) and is fully threaded (Option 00 unthreaded length). It employs a 1.0 m cable (Option 10) fitted with a miniature coaxial ClickLoc connector (Option 02) without a connector protector. Unlike variants configured with the -05 agency approval option, this model uses the -00 option, which is suitable for standard, non-hazardous areas where special industrial certifications are not required.

Features

• Flexible stainless steel armor (AISI 302 or 304) with FEP outer jacket provides protection in harsh mechanical environments.
• Fully threaded 3/8-24 UNF-2A case with 2.8 in total case length and 0.0 in unthreaded length.
• Standard triaxial cable with 1.0 m total length for proximity transducer chains.
• Miniature coaxial ClickLoc connector without protector provides standard connection to extension cables.
• General application design (Option 00) for installation where hazardous area approvals are not required.

Applications

• Shaft vibration and axial position measurement on industrial rotating machinery.
• Asset protection monitoring in steam/gas turbines, centrifugal compressors, and generators.
• Bearing clearance and oil-film thickness monitoring in non-hazardous industrial environments.

Ordering Information

Technical Specifications

Connections and Interfaces

Installation Guidelines

• Do not exceed the maximum rated installation torque of 11.2 Nm (100 in-lbf) for standard forward mounted probes.
• Observe the minimum permissible cable bend radius of 25.4 mm (1.0 in) during routing to prevent jacket or shield failure.
• Ensure the probe tip is clear of any surrounding metal side-clamping structures to avoid calibration errors.
• Tighten ClickLoc connectors finger tight to achieve a proper mechanical and electrical connection.