Bently Nevada 330104-02-13-10-01-00 3300 XL 8 mm Proximity Probe with Armor

Description

330104-02-13-10-01-00: 3300 XL 8 mm proximity probe with metric M10 x 1 threads, integrated stainless steel protective armor, 20 mm unthreaded length (Option 02), 130 mm overall case length (Option 13), 1.0-meter total length (Option 10), miniature coaxial ClickLoc connector with connector protector (Option 01), and no agency approvals required (Option 00).

This specific metric thread configuration is equipped with flexible stainless steel armor to shield the coaxial cable against abrasion, mechanical impact, and harsh industrial environments, unlike unarmored variants like the 330103. The inclusion of a ClickLoc connector protector (Option 01) protects the termination from moisture ingress and physical stress when paired with standard 3300 XL extension cables. With a total system length of 1.0 meter, this probe functions as part of a complete 3300 XL 8 mm eddy-current transducer system, matching standard Proximitor sensors.

Features

• Option 02: 20 mm unthreaded length on a metric M10 x 1 threaded body.
• Option 13: 130 mm overall case length made of AISI 303 or 304 stainless steel.
• Option 10: 1.0-meter total cable length with integrated flexible stainless steel armor.
• Option 01: Miniature coaxial ClickLoc connector supplied with a factory-installed connector protector.
• Option 00: Standard commercial configuration with no special agency approvals required.
• Armor Construction: Flexible AISI 302 or 304 SST with an outer FEP jacket to prevent fluid ingress.
• Probe Tip: 8.0 mm diameter tip constructed of polyphenylene sulfide (PPS) for chemical and thermal stability.

Applications

• Shaft radial vibration measurement on rotating machinery.
• Axial rotor position monitoring in utility steam turbines and gas turbines.
• Casing expansion and valve position tracking.
• Thrust bearing wear detection in industrial centrifugal compressors and pumps.
• Hydrocarbon and power generation turbine generator monitoring systems.

Ordering Information

Technical Specifications

Installation Guidelines

• Observe the minimum bend radius of 25.4 mm (1.0 in) for the armored probe cable during routing to prevent core damage.
• Avoid exceeding the maximum rated case torque of 22.6 N-m (200 in-lbf) during installation; standard recommended torque for metric M10 threads is 7.5 N-m (66 in-lbf).
• Ensure the thread engagement does not exceed 15 mm to prevent binding or thread deformation in the mounting machine casing.
• When joining coaxial connectors, hand-tighten the miniature ClickLoc gold connectors until they click to secure the electrical path.
• Maintain adequate separation between the probe cable and potential sources of high-voltage electromagnetic interference (EMI).