Bently Nevada 330104-08-14-05-01-00 3300 XL 8 mm Proximity Probe

Description

Option 08 (80 mm unthreaded length) and Option 14 (140 mm overall case length) specify this metric threaded 3300 XL 8 mm proximity probe configuration — 330104-08-14-05-01-00.

This probe features M10 x 1 metric threads and integrates metal armor to protect the coaxial cable from abrasive environments. The 330104-08-14-05-01-00 includes a 0.5-meter (1.6 feet) total length, a miniature coaxial ClickLoc connector with a pre-installed connector protector (Option 01), and is supplied without agency approvals (Option 00). Unlike sibling non-armored configurations such as the 330103 series, the armored sheath on this model adds mechanical resistance to routing paths subject to physical wear.

Features

• M10 x 1 metric threads with a 140 mm overall case length (Option 14) and 80 mm unthreaded length (Option 08).
• Integral metal armor sheath protects the coaxial cable along its entire length.
• Miniature coaxial ClickLoc connector featuring a factory-installed connector protector (Option 01).
• 0.5-meter (1.6 feet) total cable length (Option 05) for connection to compatible standard extension cables.
• 8.0 mm probe tip diameter compatible with standard 3300 XL 8 mm Proximitor sensors.
• Option 00 configuration for applications where hazardous area approvals are not required.

Applications

Typical industrial machinery applications include shaft vibration and axial position measurements on fluid-film bearing machines, such as steam turbines, gas turbines, compressors, gearboxes, pumps, and electric motors. This armored variant is used in installations where cables are routed through harsh mechanical spaces or exposed conduit pathways subject to high friction, abrasion, or physical wear.

Ordering Information

Technical Specifications

Installation Guidelines

To establish correct installation of the M10 x 1 threaded probe:

• Verify that the unthreaded length of 80 mm is compatible with the mounting bracket depth to ensure thread engagement.
• Ensure maximum thread engagement does not exceed 15 mm for the M10 x 1 casing thread to prevent binding.
• Use a M10 hexagonal wrench to torque the probe case into position. Do not exceed recommended torque values during installation.
• Ensure the ClickLoc connectors are kept clean and dry. Finger-tighten the gold coaxial click connectors to establish proper electronic connection; do not use pliers unless mating with non-XL stainless steel connectors.
• Maintain a minimum bend radius of 25.4 mm (1.0 in) for the armored cable to avoid physical damage to the coaxial core.