Bently Nevada 330130-040-11-05 3300 XL Standard Extension Cable

Description

330130-040-11-05 specifies this 3300 XL 8 mm standard extension cable configuration featuring 4.0 meters (13.1 feet) of armored FluidLoc cable with hazardous area approvals. This specific configuration pairs a 4.0 m cable length (Option 040) with armored FluidLoc construction (Option 11) to prevent oil or moisture migration along the cable interior while providing mechanical protection against crushing and abrasion. The extension cable is completed with CSA, ATEX, and IECEx hazardous area certifications (Option 05) for deployment in explosive atmospheres.

Unlike standard configurations such as the unarmored 330130-040-00-00 or non-FluidLoc armored options, this cable integrates internal FluidLoc sealing and stainless steel external armor, making it optimal for harsh industrial environments where machine casings contain pressurized lubricating oil. It is used for gold-to-gold connection within a Bently Nevada 3300 XL 8 mm proximity transducer system, connecting the proximity probe to a 5 m or 9 m Proximitor sensor.

Features

• 4.0 meters (13.1 feet) total length (Option 040) matching the requirements of 5-meter or 9-meter transducer system loops.
• Armored FluidLoc cable construction (Option 11) combining a silicone-based fluid-blocking core with robust stainless steel outer armor.
• Hazardous area approvals (Option 05) including CSA, ATEX, and IECEx certifications for safe operation in Class I, Division 2 and Zone 2 explosive environments.
• Miniature coaxial ClickLoc connectors with gold-plated contacts to ensure low resistance and stable signal transmission.
• High physical protection against abrasion, mechanical impact, and crushing.
• Temperature rating spanning from -52 degC to +177 degC (-62 degF to +350 degF) for high-reliability machinery monitoring.

Applications

Typical heavy-industry scenarios for this extension cable include:

• Machinery protection and condition monitoring in steam and gas turbines, compressors, gearboxes, pumps, and fans.
• Pressurized machinery casings where lubricating oil must be sealed against leakage along the cabling pathway.
• Heavy-industry sectors including oil and gas, petrochemicals, power generation, and refining.

Ordering Information

Technical Specifications

Installation Guidelines

To ensure proper performance and long service life of the extension cable, follow these engineering guidelines during installation:

• Keep connectors clean and free from oil, dust, or moisture before and during installation.
• Slide a connector protector sleeve over the connection point when joining to the probe to secure against environmental intrusion.
• Do not exceed the minimum bend radius of the armored cable (typically 25 mm or 1.0 inch).
• Tighten the ClickLoc connectors finger tight. When connecting a non-XL stainless steel connector to an XL connector, tighten finger tight plus 1/8 turn using pliers.
• Route the armored cable through conduit or on cable trays where additional physical impact protection is required.

Compliance and Certifications

• CSA: Class I, Division 2, Groups A, B, C, D
• ATEX: Ex ia IIC T4/T5 Ga, Ex nA IIC T4/T5 Gc, Zone 2 Ex ec IIC T4/T5 Gc
• IECEx: Ex ia IIC T4/T5 Ga, Ex ec IIC T4/T5 Gc
• CE Compliant