Honeywell 50124386-001 LTA V51/5197 Actuator Mounting Bracket

Stokta sadece 7 adet kaldı

Üretici: Honeywell
Ürün No.: 50124386-001
Menşei ülke:Amerika Birleşik Devletleri
Ürün Türü: Actuator Mounting Brackets
Ödeme: T/T, Western Union
Ağırlık: 3000g
Boyutlar: 170 mm x 138 mm x 138 mm
Gönderim limanı: Xiamen
Garanti: 12 ay

Description

Engineered for heavy-duty industrial valve and damper positioning systems, the Honeywell 50124386-001 serves as a robust mounting bracket solution designed specifically for the LTA, V51, and 5197 series actuator assemblies. This industrial-grade mechanical hardware ensures precise physical alignment, minimizing shaft runout and mechanical wear under high-torque operations.

Features

Precision-machined steel alloy construction for high torsional rigidity.
Corrosion-resistant surface finish optimized for harsh process environments.
Pre-drilled mounting patterns ensuring exact alignment with V51 and LTA actuator footprints.
Heavy-gauge structural design rated to withstand peak mechanical torque applications.

Applications

Industrial combustion air damper control linkages.
Heavy HVAC damper actuator positioning.
Process control valve bracket replacements.
High-vibration fan and ventilation plant installations.

Technical Specifications

Parameter	Specification Value
Manufacturer	Honeywell
Part Number / SKU	50124386-001
Compatible Actuators	Honeywell LTA, V51, and 5197 Series
Material	Heavy-gauge structural steel alloy
Maximum Torque Rating	Supports up to 150 in-lb operating loads
Operating Temperature Limits	-40 to +70 degC (-40 to +158 degF)
Storage Temperature Limits	-40 to +80 degC (-40 to +176 degF)
Approximate Physical Dimensions	170 mm x 138 mm x 138 mm (6-11/16 x 5-29/64 x 5-29/64 inches)
Net Weight	1.4 kg (3.0 lbs)
Shipping Weight (Calculated)	3.0 kg

Alternative Models & Compatibility

This mounting hardware kit is engineered to drop directly into standard industrial footings for the V51 and 5197 Honeywell motorized actuators. It serves as a direct upgrade to legacy structural brackets that lack the structural reinforcement profiles required for high-duty-cycle modulating dampers.

Application Pitfalls & Engineering Notes

Ensure that mounting surfaces are completely flat prior to bolting down the bracket. Any deflection or twist introduced into the bracket base during installation will misalign the linkage or actuator output shaft, leading to premature bearing failure in the drive assembly. If deployed in applications exceeding 150 in-lb peak dynamic load, additional external structural supports are required.

Commissioning & Alignment Tips

Verify shaft concentricity using a dial indicator during initial setup. Radial runout must not exceed tolerances specified in the actuator manual. Tighten all assembly fasteners in an alternating pattern to distribute torque evenly and prevent structural binding.

Installation Guidelines

CRITICAL WARNING: Prior to mounting or performing maintenance on the actuator assembly, disconnect all electrical power sources and isolate any coupled process control equipment. Failure to de-energize mechanical drives can result in unexpected actuator cycle triggers and severe physical injury.

Align the mounting bracket base holes with the actuator installation plate on the process valve or damper frame.

Secure the bracket using high-tensile mounting bolts (Grade 5 or higher recommended) and apply a medium-strength thread-locking compound.

Mount the Honeywell actuator to the bracket top face, ensuring complete alignment of keyways and connecting shafts before final torque is applied.

Key Features:

#Actuator Mounting Brackets #Honeywell LTA

Which Honeywell actuator lines are compatible with this mounting bracket assembly?

This bracket is designed specifically for Honeywell LTA, V51, and 5197 series industrial valve and damper actuators.

What is the maximum torque capacity supported by this mechanical mounting bracket?

It is structurally optimized for heavy industrial operations, handling peak actuator output loads of up to 150 in-lb safely.

Does this mounting bracket require specific environmental considerations?

No. The rugged steel alloy construction and specialized coating allow it to operate reliably in harsh ambient environments ranging from -40 to +70 degC.

Küresel Ekspres Kargo

Standart Teslimat: DHL, FedEx ve UPS ile 4-6 iş günü.
Hızlı Gönderim: Saat 14:00 (GMT+8) öncesi verilen stoktaki siparişler aynı gün gönderilir.
Dünya Çapında Hizmet: Suudi Arabistan ve BAE'ye hızlı teslimat dahil 150'den fazla ülkeye hizmet veriyoruz.

İadeler ve Garanti

30 Günlük Garanti: Stokta bulunan ürünler, orijinal, fabrika mühürlü ambalajında iade kabul edilir.
12 Aylık Garanti: Her endüstriyel bileşen profesyonel teknik garantimizle desteklenmektedir.

Siparişler Pazartesi-Cuma (resmi tatiller hariç) işlenir ve teslim edilir.

Tam uygunluk, stok yenileme ücretleri ve uluslararası iade detayları için lütfen resmi sayfamızı inceleyin İade ve Geri Ödeme Politikası .

TECHNICAL SPECIFICATIONS

Country of origin

Honeywell 50124386-001 LTA V51/5197 Actuator Mounting Bracket