Siemens 6ES7410-5FM08-0AB0 SIMATIC S7-400 CPU 410SIS Safety Controller

Only 2 item(s) left in stock

Manufacturer: Siemens
Product No.: 6ES7410-5FM08-0AB0
Country of origin:Almanya
Product Type: Safety PLC CPU
Barcode: 85389091
Payment: T/T, Western Union
Weight: 1490g
Dimensions: 29.0 cm x 21.9 cm x 5.0 cm
Shipping port: Xiamen
Warranty: 12 months

Description

The Siemens 6ES7410-5FM08-0AB0 is a CPU 410SIS Safety Controller, a central processing unit designed for the SIMATIC S7-400F (fail-safe) and S7-400FH (fault-tolerant, high-availability) automation systems. This module provides robust control and communication capabilities for safety-critical applications. It features a total of 5 interfaces, including 2x PROFINET (PN), 1x PROFIBUS DP, and 2x interfaces for Sync modules used in redundant configurations. This unit is supplied as a spare part and does not include a System Expansion Card.

Features

■Integrated safety controller for S7-400F and S7-400FH systems.
■Multi-protocol support with onboard PROFINET and PROFIBUS DP ports.
■Dedicated interfaces for synchronization modules to enable high-availability operation.
■Designed for use as a direct replacement spare part.

Applications

■Process control systems requiring functional safety (SIL).
■Fault-tolerant and redundant automation architectures.
■Emergency shutdown systems (ESD) and burner management systems (BMS).
■Critical infrastructure and manufacturing plant control.

Technical Specifications

Specification	Value
Manufacturer	Siemens
Product Series	SIMATIC S7-400
Model Number	6ES7410-5FM08-0AB0
Product Type	CPU 410SIS Safety Controller
System Compatibility	S7-400F, S7-400FH
Interfaces	2x PROFINET, 1x PROFIBUS DP, 2x Sync Module
System Expansion Card	Not Included
Product Lifecycle Status	Phase-Out
Shipping Weight	1.49 kg
Package Dimensions (Calculated)	29.0 cm x 21.9 cm x 5.0 cm
Commodity Code	85389091
ECCN	EAR99
Country of Origin	Germany (Estimate)

Installation Guidelines

CRITICAL WARNING: Installation or replacement of safety-rated hardware must be performed by qualified personnel only. Failure to follow proper procedures, including system validation and testing, can result in equipment damage, serious injury, or death. Always adhere to local safety regulations and site-specific protocols.

1 De-energize the entire S7-400 rack and apply Lockout/Tagout (LOTO) procedures to all power sources.
2 Verify the absence of voltage at the power supply terminals using a calibrated multimeter.
3 Use a properly grounded ESD wrist strap to prevent electrostatic discharge damage to the CPU.
4 Carefully align the CPU module with the guide rails of the designated slot in the S7-400 rack.
5 Slide the module into the rack and apply firm, even pressure to ensure it is fully seated on the backplane connectors.
6 Secure the module in place by tightening the retaining screws located on the front panel. Do not overtighten.
7 Connect all required communication cables (PROFINET, PROFIBUS DP) and synchronization module fiber optic cables to their respective ports.
8 Once all connections are verified, remove LOTO devices and re-energize the system for commissioning and a full functional safety test.

Key Features:

#Safety CPU Module #SIMATIC S7-400

What systems is this CPU compatible with?

The 6ES7410-5FM08-0AB0 CPU is specifically designed for Siemens SIMATIC S7-400F (fail-safe) and S7-400FH (fault-tolerant, high-availability) automation systems.

What communication interfaces are included on this module?

This safety controller features five integrated interfaces: two for PROFINET (PN), one for PROFIBUS DP, and two dedicated ports for synchronization modules used in redundant H-systems.

Is a System Expansion Card included with this part number?

No, this unit is supplied as a spare part and does not include the System Expansion Card. It must be ordered separately if required for a new installation.

What is the product lifecycle status of this CPU?

According to the provided information, this product is in the 'Phase-Out' stage of its lifecycle, indicating it is being discontinued but may still be available for spare parts.

Global Express Shipping

Standard Delivery: 4-6 Business Days via DHL, FedEx, and UPS.
Express Dispatch: Same-day dispatch for in-stock orders placed before 2:00 PM (GMT+8).
Worldwide Coverage: Serving over 150 countries, including rapid delivery to Saudi Arabia and UAE.

Returns & Warranty

30-Day Guarantee: Returns accepted for in-stock products in original, factory-sealed packaging.
12-Month Warranty: Every industrial component is backed by our professional technical warranty.

Orders are processed and delivered Monday-Friday (excluding public holidays).

For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .

TECHNICAL SPECIFICATIONS

Country of origin

Siemens 6ES7410-5FM08-0AB0 SIMATIC S7-400 CPU 410SIS Safety Controller