Manufacturer: Bently Nevada
Product No.: 3500/25-01-01-CN
Country of origin:United States
Product Type: Vibration Monitoring Modules
Payment: T/T, Western Union
Weight: 320g
Shipping port: Xiamen
Warranty: 12 months
Providing high-accuracy phase reference and rotational speed measurements for machinery protection, the Bently Nevada 3500/25-01-01-CN is a half-height, dual-channel module designed for the 3500 Machinery Protection System. This specific model features a single half-height 2-channel Keyphasor card paired with an I/O module configured for internal terminations. The hardware processes input signals from proximity probes or magnetic pickups, converting them into digital phase reference pulses used by other monitoring modules in the rack. Approved under country-specific standards (CN designation), this industrial-grade module ensures reliable operation within critical diagnostic architectures.
| Option Code | Configuration Detail |
|---|---|
| 3500/25 | Enhanced Keyphasor Module |
| -01 | Single half-height 2-channel Keyphasor card (order for 2 channels) |
| -01 | I/O Module with Internal Terminations |
| -CN | Country Specific Approvals (China / Regional Standards) |
| Parameter | Value / Requirement |
|---|---|
| Manufacturer | Bently Nevada |
| Series | 3500 Machinery Protection System |
| Input Channels | 2 differential or single-ended channels |
| Input Signal Range | +0.8 V to -26.0 V (Non-contact sensors) or 8 V peak-to-peak (Magnetic pickups) |
| Input Impedance | 10 kohm minimum |
| Power Consumption | 3.2 Watts typical |
| Signal-to-Noise Ratio | Minimum 20 dB dynamic range |
| Operating Temperature Range | -30 degC to +65 degC (-22 degF to +149 degF) |
| Country of Origin | United States (Made in U.S.A.) |
| Shipping Weight (Calculated) | 2.0 kg (including module, internal terminations I/O card, and protective packaging) |
| Terminal / Pin No. | Signal Assignment | Description |
|---|---|---|
| 1 | KPH 1 + | Keyphasor Channel 1 Non-Inverting Signal Input |
| 2 | KPH 1 - | Keyphasor Channel 1 Inverting / Common Return |
| 3 | KPH 1 OUT | Transducer Power (-24 VDC Supply for Proximitor) |
| 4 | KPH 2 + | Keyphasor Channel 2 Non-Inverting Signal Input |
| 5 | KPH 2 - | Keyphasor Channel 2 Inverting / Common Return |
| 6 | KPH 2 OUT | Transducer Power (-24 VDC Supply for Proximitor) |
| 7 | SHIELD | Dedicated cable shield ground point (tied to chassis ground) |
The "Enhanced" 3500/25 module directly replaces legacy non-enhanced 3500/25 modules. However, firmware compatibility must be verified prior to hot-swapping: your 3500 Rack Configuration Software must be upgraded to version 3.3 or higher to configure the advanced dynamic hysteresis options. Do not attempt to run a non-enhanced card and an enhanced card as a redundant pair in the same slot space; both cards must share the same hardware revision level to guarantee system synchronization.
When configuring magnetic pickups, field engineers should note that the output signal drops significantly at low RPM. If the machine operates below 100 RPM, standard passive magnetic pickups may not generate sufficient amplitude to cross the threshold, leading to "Keyphasor Fault" indications. In these scenarios, use active proximity sensors which maintain constant voltage outputs down to zero speed.
To prevent electromagnetic interference (EMI) from neighboring power cables and variable frequency drives (VFDs), ensure Keyphasor wiring is routed via dedicated, shielded twisted-pair (STP) lines. The shield should only be grounded at the 3500 chassis ground terminal on the I/O card; the sensor-end shield must be left floating and insulated to eliminate parasitic ground loops.
Prior to removing or installing any 3500/25 module, ensure the rack is placed in a bypassed or safe state. Improper hot-swapping in active protection racks can trigger false machinery trip signals. Verify field wiring insulation to prevent accidental shorting of the -24 VDC transducer power lines to the chassis ground.
Inspect the module backplane and gold connector pins for debris or misalignment before insertion.
Align the half-height module card with the upper or lower guide rails in the selected slot location.
Slide the module gently but firmly straight back into the rack until the ejector tabs lock cleanly.
Secure the front-panel mounting screws to ensure proper chassis grounding and thermal contact.
Upload and verify configuration parameters via the Bently Nevada 3500 Rack Configuration software.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
A practical guide to replacing aging Bailey Symphony operator stations running on OpenVMS Alpha. It compares Alpha emulation, OpenVMS x86 migration, OPC re-platforming, and phased ABB modernization.
Maintenance data connects work orders, sensor signals, asset history, costs, and technician knowledge. Used well, it improves planning, reliability, predictive maintenance, spare-parts control, and...
Ushbu maqola SMCning e-Actuator seriyasi kabi integratsiyalashgan elektr aktuatorlarining sanoat harakatini boshqarishda an’anaviy pnevmatik va gidravlik tizimlarni qanday almashtirayotganini...
Ushbu maqola PLC tizimlari sanoat avtomatlashtirishida qo‘shish, ayirish, ko‘paytirish, bo‘lish, modulo va darajaga ko‘tarish kabi asosiy matematik amallarni qanday bajarishini tushuntiradi. Unda...
Maqola PLC dasturlashda asosiy AND, OR va NOT amallaridan tashqari bir nechta ilg‘or Boolean mantiq funksiyalarini tushuntiradi. Unda haqiqat jadvallari, multiplexerlar, impuls generatorlari va...
Boolean mantiq har bir PLC dasturining asosidir. Oddiy mashina boshqaruvlaridan tortib murakkab sanoat avtomatlashtirish tizmlarigacha, mantiqiy eshiklar boshqaruvchilarning o‘zgaruvchan kirishlar va...
