Siemens 6AV7812-0BB11-1AC0 SIMATIC Panel PC 877 15-inch Touch Panel PC

Description

This is a Siemens 6AV7812-0BB11-1AC0, a SIMATIC Panel PC 877 designed for industrial human-machine interface (HMI) and control applications. This unit features a 15-inch touch display with a resolution of 1024x768 pixels. It is powered by a Pentium 4 2.8 GHz processor and is equipped with 512MB of DDR266 SDRAM and an 80 GByte EIDE hard drive. The system comes pre-installed with Windows XP Professional Multi-Language User Interface (MUI) and includes a DVD-ROM drive for software installation and data access.

Features

• 15-inch color touch screen display
• 1024 x 768 pixel screen resolution
• Intel Pentium 4 processor operating at 2.8 GHz
• 512 MB DDR266 SDRAM for application processing
• 80 GB EIDE internal hard disk drive for storage
• Integrated DVD-ROM optical drive
• Pre-installed Windows XP Professional (MUI) operating system
• Wide input voltage range of 110-230V AC

Applications

• Process visualization and control
• Machine-level data acquisition and logging
• Factory floor operator stations
• Supervisory Control and Data Acquisition (SCADA) nodes
• Maintenance and diagnostics interfaces for automated systems

Technical Specifications

Installation Guidelines

1. 1 Prepare Mounting Location: Ensure the panel cutout dimensions match the PC's specifications for a secure fit. Verify that the mounting surface is flat, rigid, and can support the unit's weight (17.00 kg). Maintain required clearance for ventilation around the unit.
2. 2 Mount the Unit: Insert the Panel PC into the cutout from the front. Secure it from the rear using the provided mounting clamps. Tighten the clamp screws evenly in a diagonal pattern to ensure a uniform seal against the panel gasket. Do not overtighten.
3. 3 Establish Protective Earth (PE) Connection: Connect the designated PE terminal on the Panel PC chassis to the cabinet's main protective earth busbar using a low-impedance conductor. This is a critical safety and noise immunity requirement.
4. 4 Connect Power: After verifying the source voltage matches the 110-230V AC rating, connect the AC power cable to the unit's power inlet. Ensure the power source is stable and properly fused.
5. 5 Connect Peripherals: Connect all required peripherals such as keyboards, mice, and network cables. Route all I/O and communication cables away from high-voltage power lines to minimize electrical noise interference.