Siemens 6AV7873-0BC30-1AC0 SIMATIC Panel PC 677B

Description

The Siemens 6AV7873-0BC30-1AC0 is a SIMATIC Panel PC 677B, an integrated human-machine interface (HMI) solution for industrial control and visualization. This unit features a 15-inch keypad display with a resolution of 1024 x 768 pixels. It is powered by an Intel Core 2 Duo T5500 processor and includes an integrated 110/230 V AC power supply with NAMUR specifications. The system comes pre-installed with Windows XP Professional and is equipped with multiple communication interfaces, including dual Gigabit Ethernet, USB 2.0, and a PROFIBUS/MPI port, making it suitable for complex automation tasks.

Features

• ■15-inch keypad-operated display
• ■Intel Core 2 Duo T5500 processor at 1.66 GHz
• ■Integrated 110/230 V AC power supply
• ■Dual 10/100/1000 Mbit/s Ethernet ports for network connectivity
• ■Onboard PROFIBUS/MPI communication interface
• ■Includes 2 GB DDR2 RAM and a 160 GB SATA hard drive
• ■Front-side USB port for convenient access
• ■Equipped with a DVD+-R+-RW optical drive

Applications

• ■Machine-level control and visualization
• ■Process monitoring and data acquisition systems
• ■Factory automation and assembly line management
• ■Industrial computing platforms requiring legacy OS support

Technical Specifications

Installation Guidelines

1. 1 Ensure the control cabinet or panel cutout meets the dimensional requirements for the Panel PC 677B chassis. Verify adequate clearance for ventilation and cable routing.
2. 2 Mount the unit securely into the panel cutout using all provided mounting clamps. Tighten the clamps evenly to ensure a proper seal and prevent chassis distortion.
3. 3 Connect the protective earth (PE) conductor to the designated grounding terminal on the chassis. A low-impedance ground connection is essential for safety and noise immunity.
4. 4 Connect the 110/230 V AC power supply cable. Ensure the source voltage matches the unit's rating. Route the power cable separately from communication and I/O cables to minimize electrical noise.
5. 5 Connect all required communication cables (Ethernet, PROFIBUS, USB, Serial) to their respective ports. Ensure all connectors are fully seated and secured.