Bently Nevada 330101-00-43-15-12-05 3300 XL 8 mm Proximity Probe

Description

For specialized machinery protection applications requiring direct fluid barrier sealing, the Bently Nevada 330101-00-43-15-12-05 is an unarmored, threaded 8 mm proximity probe featuring a 3/8-24 UNF thread configuration, a fully threaded case (0.0 inches unthreaded length), and a 4.3-inch overall case length. Unlike standard-cable configurations, this specific variant incorporates a 1.5-meter (4.9 feet) integrated FluidLoc cable to block process oil or other liquids from migrating through the internal structure of the cable. Terminated with a miniature male coaxial ClickLoc connector and certified with CSA, ATEX, and IECEx hazardous area approvals, this probe serves as a high-integrity sensing element within the 3300 XL proximity transducer system for non-contact shaft vibration and displacement measurements.

This transducer probe operates on the eddy-current principle, delivering an output voltage directly proportional to the distance between the probe tip and the observed target (typically AISI 4140 steel). When integrated with a 330180 Proximitor sensor and a 3300 XL extension cable, the system provides exceptionally stable, high-accuracy measurements across standard API 670 requirements. Because each component is backward compatible and interchangeable, it simplifies spare parts stocking and eliminates the need for individual component bench calibration.

Features

• Non-contact eddy-current dynamic and static measurement capabilities for precise shaft vibration and position monitoring.
• FluidLoc cable construction blocks process oil, moisture, and other liquids from leaking out of the machine housing along the interior of the cable sheath.
• Rugged 8 mm tip diameter molded with high-integrity TipLoc bonding to ensure maximum structural strength between the probe tip and the stainless steel body.
• Finger-tight ClickLoc coaxial connector features a positive-locking mechanism to resist rotational loosening under severe machinery vibration.
• Fully compatible and interchangeable with standard Bently Nevada 3300 XL and non-XL 3300 series 5 mm and 8 mm system components.
• Option 05 agency approval package enables installation in hazardous locations with CSA, ATEX, and IECEx certifications.

Applications

• Non-contact shaft vibration and dynamic motion analysis in high-speed rotating machinery.
• Axial thrust displacement and rotor position measurements on fluid-film bearing systems.
• Permanent machinery protection installations on industrial steam turbines, gas turbines, and turbo-compressors.
• High-integrity speed and phase reference monitoring (Keyphasor applications).
• Environments requiring zero oil migration along the transducer cabling path.

Ordering Information

Technical Specifications

Connections and Interfaces

Installation Guidelines

• Perpendicular Mounting: Ensure the threaded probe body is mounted perpendicular to the observed shaft target. Improper alignment may cause calibration skew.
• Gap Adjustment: Adjust the mechanical probe gap to the designated operating range (typically 1.27 mm or 50 mils) to center the sensor output signal in the linear range.
• Lock Nut Torque: Apply proper locking torque to the 3/8-24 UNF mounting nut to prevent mechanical backing out under operating vibration. Utilize lock washers or pre-drilled safety wire holes as recommended.
• Cable Protection: Although this FluidLoc cable prevents internal oil bypass, avoid routing the cable over sharp edges or putting it under tension. Observe a minimum bend radius of 25.4 mm (1.0 inch).
• Shield Grounding: Ensure the extension cable shields are electrically continuous and grounded only at the Proximitor mounting terminal block to prevent ground loops.

Compliance and Certifications

• CSA/c-us: Class I, Zone 0, Ex ia IIC; Class I, Div 1, Groups A, B, C, D (when installed with approved barriers)
• ATEX/IECEx: II 1 G Ex ia IIC T5...T1 Ga; II 3 G Ex ec IIC T5...T1 Gc
• Ingress Protection: Designed to meet IP68 ratings for the probe tip when properly installed, providing excellent protection against process contaminants.