Bently Nevada 330103-00-13-10-12-00 3300 XL 8 mm Proximity Probe

Description

Option 00 (0 mm unthreaded) and Option 12 (miniature coaxial ClickLoc connector, FluidLoc cable) specify this 3300 XL 8 mm probe configuration — 330103-00-13-10-12-00. This unarmored, metric forward-mounted proximity probe features M10 x 1 threads, a 130 mm overall case length, and a 1.0-meter total cable length. The configuration is suited for installations requiring fluid-blocking performance, utilizing a specialized FluidLoc cable that stops oil or moisture from wicking along the interior of the cable jacket.

This transducer component operates on eddy-current principles to measure static or dynamic distance between the probe tip and a target, such as a rotating shaft. The absence of a connector protector on the miniature coaxial ClickLoc connector and the omission of agency approvals make this variant suitable for clean, non-hazardous industrial installations where external enclosures provide connection shielding.

Features

• M10 x 1 metric thread with 130 mm overall case length and 0 mm unthreaded length (fully threaded case)
• FluidLoc cable prevents oil and moisture migration along the cable interior
• 1.0 meter (3.3 feet) total cable length
• Miniature coaxial ClickLoc connector without connector protector
• Unarmored cable design for standard routing configurations
• No hazardous area approvals required (Option 00)
• Gold-plated brass and gold-plated beryllium copper connector contacts
• Polyphenylene sulfide (PPS) molded probe tip

Applications

• Fluid-prone industrial environments requiring internal cable blocking against oil or moisture
• Shaft dynamic vibration and axial position measurements in rotating machinery
• Metric installations using M10 x 1 threaded mounting brackets
• Non-hazardous industrial areas requiring non-contacting distance measurements
• Monitoring systems for steam turbines, gas turbines, compressors, and pumps

Ordering Information

Technical Specifications

Connections and Interfaces

Installation Guidelines

• Observe the minimum bend radius limit of 25.4 mm (1.0 in) for the FluidLoc cable during installation and routing.
• Avoid over-tightening the probe case; use a calibrated torque wrench and do not exceed the recommended installation torque of 11.2 Nm (100 in-lbf) or maximum rating of 33.9 Nm (300 in-lbf).
• Ensure the mating ClickLoc connectors are joined finger-tight; do not use pliers to tighten gold ClickLoc connectors together.
• Install the probe into M10 x 1 threaded mounting brackets, verifying that thread engagement does not exceed 15 mm to prevent binding.
• Route the FluidLoc cable inside conduit or cable trays to prevent mechanical damage, keeping it isolated from high-voltage motor or generator cables.

Compliance and Certifications

The 330103-00-13-10-12-00 configuration specifies Option 00 for agency approvals (no hazardous area approvals required). It is designed for use in general-purpose, non-hazardous industrial environments. The manufacturing facility for the 3300 XL transducer system is certified to ISO 9001 quality management standards.