Manufacturer: General Electric
Product No.: IS220PSFDH1A
Country of origin:Hoa Kỳ
Product Type: Power Supply Pack
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 380g
Dimensions: 12.8cm x 8.2cm x 6cm
Shipping port: Xiamen
Warranty: 12 months
The IS220PSFDH1A is a specialized Flame Detector Power Supply pack manufactured by General Electric as part of the Mark VI Speedtronic Turbine Control System Series. This modular assembly is engineered to provide reliable, high-voltage electrical excitation directly to the flame detector circuits located on the primary gas turbine trip protection board (TRPG). Acting as a critical link within the turbine safety and flame monitoring infrastructure, the IS220PSFDH1A interfaces seamlessly through physical hardware connections to drive active optical sensors and ensure deterministic feedback verification. The base printed circuit board is protected comprehensively with a chemically-applied conformal coating layer, ensuring resilience against airborne contaminants and harsh ambient environments typical of industrial power generation facilities.
| Parameter | Specification Value |
|---|---|
| Manufacturer | General Electric |
| Part/Model Number | IS220PSFDH1A |
| Functional Abbreviation | PSFD |
| Product Series | Mark VI Speedtronic |
| Assembly Classification | IS220 Special Assembly (Group 1 Layout) |
| Primary Functional Revision | A (Alters baseline performance and electrical execution) |
| Maximum Input Voltage | 29.4 V dc |
| Startup Operational Time | 34 mS (At full load with 28 V dc input source) |
| Full-Load Power Consumption | 4.1 W |
| Maximum Open-Circuit Output Voltage | 355 V dc (At zero load with 29.4 V dc input) |
| Local Output Diagnostic Interface | Differential pair TP test points |
| Physical Enclosure Geometry | Rectangular industrial housing |
| Working Temperature Range | -30 degrees Celsius to +65 degrees Celsius |
| Cooling Methodology | Natural Convection (Fanless) |
| Country of Origin | United States (Domestic GE Manufacture) |
| Interface Connection | Function / Circuit Assignment |
|---|---|
| J3 Connector | Flame detector power supply circuit link 1 to TRPG board |
| J4 Connector | Flame detector power supply circuit link 2 to TRPG board |
| J5 Connector | Flame detector power supply circuit link 3 to TRPG board |
| TP Test Points | Differential hardware probe points for local output voltage verification |
| Faceplate IR Port | Infrared port (Not used / Inactive in production assembly) |
Engineers should note that the internal step-up circuitry of this module generates high-voltage operational spikes reaching up to 355 V dc under zero-load conditions given a maximal input profile of 29.4 V dc. Ensure appropriate voltmeter instrumentation is set to withstand high-voltage ranges when troubleshooting local test points. The integrated infrared (IR) interface located on the front panel faceplate remains non-functional and must not be used for diagnostic calibration sequences.
When monitoring live operational parameters during start-up tracking loops, connect calibrated multi-meter leads carefully across the differential pair of TP test points. Given that this module outputs high potential within 34 milliseconds from full-load engagement, transient verification should be performed using storage-type digital oscilloscopes to correctly isolate output ripple factors or installation tracking noise.
CRITICAL WARNING:
This device generates open-circuit potential up to 355 V dc. Disconnect and verify absolute zero energy on all primary DC input networks before handling interface modules or tracking structural wires. Touching active connections will result in severe electrical shock injuries or immediate card short-circuit failure.
Mount the rectangular pack assembly directly above the TRPG (primary gas turbine trip protection board) on a stable sheet metal surface structure.
Secure the assembly base mechanical layout using specified mounting studs, mounting brackets, and the designated mounting plate to limit physical shock deformation.
Firmly couple the primary power routing interfaces into connectors J3, J4, and J5 on the TRPG board to establish complete signal path paths for the flame detection array.
Vận chuyển nhanh toàn cầu
Trả hàng & Bảo hành
Đơn hàng được xử lý và giao từ thứ Hai đến thứ Sáu (không bao gồm ngày lễ).
Để biết đầy đủ điều kiện, phí lưu kho và chi tiết trả hàng quốc tế, vui lòng xem trang chính thức của chúng tôi Chính sách Hoàn tiền & Trả hàng .
| Color pattern |
Đen
|
| Country of origin |
Hoa Kỳ
|
| Power source |
Nguồn điện DC
|
This article explains how integrated electric actuators, such as SMC’s e-Actuator series, are transforming industrial motion control by replacing traditional pneumatic and hydraulic systems. It...
This article explains how PLC systems perform core mathematical operations such as addition, subtraction, multiplication, division, modulo, and exponentiation within industrial automation. It shows...
The article explains several advanced Boolean logic functions used in PLC programming beyond basic AND, OR, and NOT operations. It covers how tools like truth tables, multiplexers, pulse generators,...
Boolean logic is the foundation of every PLC program. From simple machine controls to complex industrial automation systems, logic gates determine how controllers respond to changing inputs and...
Industrial firewalls play a critical role in OT cybersecurity, protecting PLC, DCS, and SCADA networks through segmentation, ingress/egress control, and IDS/IPS integration aligned with IEC 62443...
Modern robotic grippers are evolving beyond traditional mechanical jaws. From gecko-inspired adhesive systems and soft food-grade grippers to AI-powered warehouse tools, advanced gripping...
