Siemens 6AV7613-0AE20-0AG0 SIMATIC Panel PC 670 Panel PC

Description

The Siemens 6AV7613-0AE20-0AG0 is a SIMATIC Panel PC 670 designed for industrial human-machine interface (HMI) and control applications. This unit features a 12-inch TFT display and is powered by a 300 MHz Celeron CPU. The standard configuration includes 128 MB of RAM and a 40 GB hard drive for data storage and application hosting. It operates on a 24 V DC power supply and comes pre-installed with the Windows 2000 Multi-Language operating system, supporting English, German, French, Italian, and Spanish. Please note that this model is part of a legacy product line and is considered obsolete by the manufacturer, making it suitable for spare parts and maintaining existing systems.

Features

• 12-inch TFT color display for process visualization
• Intel Celeron processor operating at 300 MHz
• 128 MB of installed RAM
• 40 GB hard disk drive for operating system and application data
• Powered by a nominal 24 V DC input
• Pre-loaded with Windows 2000 Multi-Language Edition
• Robust construction for industrial environments

Applications

• Machine-level HMI and control
• Process visualization and data acquisition
• Supervisory control systems
• Factory automation and plant floor operations
• Replacement unit for existing SIMATIC PC 670 installations

Technical Specifications

Installation Guidelines

1. 1 Verify the panel cutout dimensions in the enclosure match the Panel PC's mounting requirements. Ensure adequate clearance for ventilation and cable routing.
2. 2 De-energize the control cabinet and apply Lockout/Tagout (LOTO) procedures before beginning any physical installation work.
3. 3 Insert the Panel PC into the cutout from the front of the enclosure. Secure it from the rear using the provided mounting clamps, tightening them evenly to the manufacturer's specified torque to ensure a proper seal.
4. 4 Connect the 24 V DC power supply to the designated power terminal. Verify correct polarity (+/-) before connecting. Use appropriately sized conductors for the load.
5. 5 Connect the chassis to the cabinet's functional ground (FE) or protective earth (PE) bus bar using a low-impedance grounding conductor.
6. 6 Connect all required communication and peripheral cables (e.g., Ethernet, USB, serial). Ensure proper shielding and cable dress to minimize electromagnetic interference.
7. 7 After verifying all connections, remove LOTO devices and re-energize the cabinet. Power on the Panel PC and confirm it boots to the operating system correctly.