Siemens 6AV7615-0AA20-0BF0 SIMATIC Panel PC 670

Description

The Siemens 6AV7615-0AA20-0BF0 is a SIMATIC Panel PC 670 designed for industrial human-machine interface (HMI) and control applications. This unit features a 15-inch TFT display and is powered by a Celeron 300 MHz CPU. The standard configuration includes 128 MB of RAM and a 20 GB hard drive. It is pre-installed with the Windows 98 operating system in English and is supplied with a U.S. mains cable for operation on 115-230V power sources. Please note that this product is considered obsolete by the manufacturer, which may impact support and availability of replacement parts.

Features

• 15-inch TFT Color Display
• Intel Celeron 300 MHz Processor
• 128 MB RAM
• 20 GB Hard Drive Storage
• Pre-installed Windows 98 Operating System (English)
• Wide input voltage range of 115-230V AC

Applications

• Human-Machine Interface (HMI) for process visualization
• Supervisory Control and Data Acquisition (SCADA) nodes
• Industrial control panel integration
• Legacy system monitoring and control

Technical Specifications

Installation Guidelines

1. 1 Prepare the panel cutout according to the device's mechanical dimensions. Ensure the mounting surface is clean, flat, and rigid.
2. 2 Insert the Panel PC into the cutout from the front. Secure it from the rear using the provided mounting clamps, tightening them evenly to ensure a proper seal.
3. 3 Connect the chassis to a dedicated protective earth (PE) or functional ground point using a low-impedance conductor to minimize electrical noise and ensure safety.
4. 4 Connect the supplied U.S. mains power cable to the device's power input and to a stable, appropriately rated 115-230V AC power source.
5. 5 Connect all required peripherals such as keyboards, mice, and network cables. Power on the unit and verify correct boot-up of the Windows 98 operating system.