Siemens 6AV7705-1DC10-0AD0 SIMATIC Panel PC 870

Description

This is a Siemens SIMATIC Panel PC 870, model 6AV7705-1DC10-0AD0, configured as a standard industrial human-machine interface (HMI) terminal. It is equipped with a 15.1-inch color TFT display, a Pentium III 1.26 GHz processor, and 128 MB of RAM. The unit includes a 40 GByte EIDE hard drive and a CD-ROM drive, with Windows 2000 Multi-Language pre-installed. It is designed for 230V AC operation and includes a mains cable with a European plug.

Features

• 15.1-inch Color TFT Display
• Intel Pentium III 1.26 GHz Processor
• 128 MByte RAM
• 40 GByte EIDE Hard Disk Drive
• Integrated CD-ROM Drive
• Pre-installed Windows 2000 Multi-Language Operating System
• Designed for 230V AC power input

Applications

• Human-Machine Interface (HMI) for process control
• SCADA client nodes
• Industrial data logging and visualization
• Machine-level control and monitoring stations
• Factory automation control panels

Technical Specifications

Installation Guidelines

1. 1
   De-energize Equipment: Before installation, completely disconnect and lock out all power sources to the control cabinet or panel where the PC will be installed. Verify the absence of voltage with a properly rated meter.
2. 2
   Panel Cutout and Mounting: Prepare the panel cutout according to the device's mechanical drawings. Ensure the mounting surface is clean, flat, and can support the weight of the unit. Secure the Panel PC into the cutout using all provided mounting clamps, tightening them evenly to ensure a proper seal.
3. 3
   Protective Earth (PE) Connection: Connect a low-impedance protective earth conductor to the designated PE terminal on the Panel PC chassis. This connection is critical for safety and noise immunity and must be established before any other connections are made.
4. 4
   Power and I/O Wiring: Connect the 230V AC mains cable to a properly fused and protected power source. Connect all communication and I/O cables. Route cables away from high-voltage lines and sources of electromagnetic interference (EMI) to prevent signal degradation.
5. 5
   System Power-Up: After verifying all connections are secure and correct, remove LOTO devices and re-apply power to the cabinet. Observe the Panel PC during its boot sequence to ensure the operating system loads correctly and there are no hardware faults.