Siemens 6AV7875-0AE51-1AC0 SIMATIC Panel PC 677B 19-inch Touch Panel PC

Description

The Siemens 6AV7875-0AE51-1AC0 is a SIMATIC Panel PC 677B designed for demanding industrial human-machine interface (HMI) and control applications. This unit features a 19-inch touchscreen display with a 1280x1024 resolution, powered by an Intel Core 2 Duo T7400 2.16 GHz processor and 4 GB of DDR2 RAM. It is equipped with extensive connectivity options, including dual Gigabit Ethernet ports, a PROFIBUS/MPI interface, and multiple USB 2.0 ports. Storage is provided by a 250 GB SATA hard disk drive, and the system comes pre-installed with Windows XP Professional MUI. This panel PC operates on a 24 V DC power supply and includes two PCI slots for hardware expansion.

Features

• 19-inch color touchscreen display with 1280 x 1024 pixel resolution
• Integrated Intel Core 2 Duo T7400 processor (2.16 GHz)
• 4 GB of installed DDR2 RAM
• 250 GB 3.5-inch SATA Hard Disk Drive (HDD)
• DVD±R/±RW optical drive for data backup and software installation
• Dual 10/100/1000 Mbit/s Ethernet ports for network redundancy or separation
• Onboard PROFIBUS/MPI interface with 2 MB buffered SRAM
• Four rear USB 2.0 ports and one front-side USB port for easy access
• One serial COM1 port for legacy device communication
• Two available PCI slots for expansion cards
• Pre-installed with Windows XP Professional Multi-language User Interface (MUI)

Applications

• Machine-level operator control and monitoring
• Process visualization and SCADA systems
• Data acquisition and logging in manufacturing environments
• Factory automation control panels
• Industrial computing platforms requiring legacy OS support

Technical Specifications

Installation Guidelines

1. 1 Prepare Panel Cutout: Verify that the enclosure or panel cutout dimensions match the manufacturer's specifications for the PC 677B. Ensure the mounting surface is clean, flat, and rigid.
2. 2 Mount the Unit: Insert the Panel PC into the cutout from the front. Secure it from the rear using all provided mounting clamps. Tighten the clamps evenly in a crisscross pattern to ensure a uniform seal against the panel gasket.
3. 3 Connect Protective Earth (PE): Connect a low-impedance protective earth conductor to the designated grounding terminal on the PC chassis. This is critical for both safety and noise immunity.
4. 4 Connect DC Power: Connect the 24 V DC power supply to the power input terminals. Verify correct polarity (+/-) before connecting. Use appropriately sized conductors for the load and distance.
5. 5 Connect Interfaces: Connect Ethernet, PROFIBUS, USB, and any other required communication or peripheral cables. Ensure all connectors are fully seated and secured. Maintain proper separation between power and signal wiring.
6. 6 Power-Up and Verification: After verifying all connections, remove the LOTO and re-energize the main cabinet supply. Power on the Panel PC and confirm that the operating system boots correctly and all connected peripherals are recognized.