Siemens 6ES7647-7BE20-2XX0 SIMATIC IPC427C Microbox PC

Description

This device is a Siemens 6ES7647-7BE20-2XX0 SIMATIC IPC427C, a compact and robust Microbox PC designed for machine-level control and visualization tasks. This specific configuration is equipped with an Intel Core 2 Solo 1.2 GHz processor with an 800 MHz Front Side Bus and 3 MB SLC cache. It includes 1 GB of DDR3 1066 SODIMM RAM for memory and a user-accessible, swappable 2 GB CompactFlash card for storage. This unit is supplied without a pre-installed operating system, allowing for custom software deployment.

Features

• Processor: Intel Core 2 Solo at 1.2 GHz
• Memory: 1 GB DDR3 1066 SODIMM
• Primary Storage: 2 GB CompactFlash card (accessible and replaceable)
• Operating System: Not included
• Hardware Expansion: No expansion modules included in this configuration
• Compact, embedded form factor for space-constrained installations

Applications

• Machine-level data acquisition and processing
• Human-Machine Interface (HMI) and SCADA applications
• Industrial communication gateways
• Embedded control and automation solutions

Technical Specifications

Installation Guidelines

1. 1 Ensure the control cabinet or mounting location is fully de-energized and locked out before beginning work. Verify the absence of voltage.
2. 2 Select a suitable mounting location on a DIN rail or panel surface, ensuring adequate clearance for ventilation and cable access.
3. 3 Securely fasten the Microbox PC to the mounting surface using the appropriate hardware. Verify the unit is mechanically stable.
4. 4 Connect the functional earth (FE) or protective earth (PE) terminal on the IPC chassis to the main system ground point using a low-impedance conductor. This is critical for noise immunity and safety.
5. 5 Connect the specified DC power supply to the power input terminals, observing correct polarity.
6. 6 Connect all required network, communication, and peripheral cables. Ensure proper cable strain relief and routing away from high-voltage lines.
7. 7 After a final inspection, remove the lockout tag and re-energize the cabinet. Proceed with software installation and system commissioning.