Siemens 6ES7647-7BJ40-0AD0 SIMATIC IPC427C Microbox PC

Description

This device is a Siemens 6ES7647-7BJ40-0AD0 SIMATIC IPC427C, a compact and robust Microbox PC designed for industrial control and visualization tasks. It is equipped with an Intel Core 2 Duo 1.2 GHz processor, 4 GB of DDR3 RAM, and a 320 GB SATA HDD for internal storage. The system comes pre-installed with the Windows 7 Ultimate (MUI) operating system, providing a familiar environment for deploying automation software. This unit is configured without hardware expansions and features a non-user-accessible internal drive.

Features

• Processor: Intel Core 2 Duo at 1.2 GHz with 800 MHz FSB
• Memory: 4 GB DDR3 1066 SODIMM
• Storage: 320 GB internal SATA Hard Disk Drive
• Operating System: Windows 7 Ultimate (MUI) pre-installed
• Form Factor: Compact Microbox PC for space-constrained installations
• Product Lifecycle: Designated as a Phase-Out product

Applications

• Human-Machine Interface (HMI) visualization stations
• Data logging and acquisition gateways
• Small-scale SCADA systems
• Process control and monitoring nodes
• Industrial communication and protocol conversion

Technical Specifications

Installation Guidelines

1. 1 Ensure the mounting surface within the control cabinet is clean, flat, and provides adequate ventilation around the PC chassis for heat dissipation.
2. 2 Securely fasten the Microbox PC to the panel using all designated mounting points. Verify the unit is mechanically stable and free from vibration.
3. 3 Connect the chassis to the cabinet's protective earth (PE) ground using a low-impedance conductor. A reliable ground connection is essential for safety and noise immunity.
4. 4 Connect all required interface cables (e.g., Ethernet, USB, display). Route signal cables separately from high-voltage power lines to prevent electromagnetic interference (EMI).
5. 5 Connect the specified DC power supply. Before energizing, verify that the supply voltage matches the rating on the device label.