Siemens 6ES7715-1BB20-0AE2 SIMATIC Field PG M3 Industrial Programming Device

Description

The Siemens 6ES7715-1BB20-0AE2 is a SIMATIC Field PG M3 Premium model, a ruggedized portable computer designed for engineering, commissioning, and maintaining industrial automation systems. This unit is equipped with an Intel Core i5-520M 2.4 GHz processor, 3 GB of DDR3 RAM, and a 500 GB SATA hard disk drive for robust performance in demanding field applications. It features a 15.6-inch Full HD display (1920 x 1080) and comes pre-loaded with a suite of Siemens engineering software, including STEP 7 Professional V11 and WinCC Advanced V11. This specific configuration is supplied without an S5 interface or S5-EPROMMER and includes an MPI cable for direct connection to SIMATIC controllers.

Features

• Processor: Intel Core i5-520M operating at 2.4 GHz.
• Memory: 3 GB DDR3 RAM (configured as 1x 1 GB and 1x 2 GB modules).
• Storage: 500 GB SATA Hard Disk Drive (HDD).
• Display: 15.6-inch Full HD widescreen with 1920 x 1080 resolution.
• Optical Drive: DL Multi-Standard DVD RW.
• Pre-installed Software: Includes licenses for STEP 7 Professional V11, WinCC Advanced V11, and STEP 7 Micro/WIN.
• Keyboard: QWERTY layout with German characters.

Applications

• PLC programming and configuration for SIMATIC controllers.
• HMI and SCADA development using WinCC.
• On-site system commissioning and startup.
• Field diagnostics, troubleshooting, and system maintenance.

Technical Specifications

Installation Guidelines

1. Visually inspect the Field PG and all cables for any signs of shipping damage before use. Do not operate if damage is apparent.
2. Place the device on a stable, level surface in a clean, dry environment, ensuring adequate ventilation around the chassis.
3. Connect the provided power line cable to the Field PG and then to a properly grounded AC power outlet that matches the device's electrical requirements.
4. Power on the Field PG and allow the Windows operating system to fully load before launching any engineering software.
5. Connect the included MPI cable between the appropriate port on the Field PG and the target SIMATIC controller or automation device.
6. Configure the communication interface within the STEP 7 software (Set PG/PC Interface) to establish a connection with the controller.