Siemens 6GK1161-6AA02 SIMATIC Communications Processor CP 1616 PCI Card

Description

Features

• PCI card interface (32-bit, 33/66 MHz, 3.3/5 V)
• Integrated ASIC ERTEC 400
• PROFINET IO connectivity
• 4-port real-time switch with RJ45 connectors
• Compatibility with DK-16XX PN IO development kit
• Supports NCM PC for configuration

Applications

• Industrial PC-based PROFINET IO communication
• Real-time Ethernet applications in automation systems
• Integration of industrial PCs into PROFINET networks
• Data exchange between PC applications and PROFINET devices

Technical Specifications

Connections / Interfaces

• PCI Interface: For connection to the industrial PC's PCI slot.
• RJ45 Ports (x4): For connection to the PROFINET IO network.

Installation Guidelines

1. Power Off: Ensure the industrial PC is completely powered down and disconnected from the main power supply before opening the chassis.
2. Open PC Chassis: Carefully open the PC chassis to access the internal components and expansion slots.
3. Locate PCI Slot: Identify an available 32-bit PCI slot compatible with the card's voltage requirements (3.3V or 5V).
4. Insert Card: Align the 6GK1161-6AA02 card with the chosen PCI slot and firmly press it down until it is fully seated.
5. Secure Card: Use the retaining bracket or screw to secure the card in place within the PC chassis.
6. Close PC Chassis: Reassemble and close the PC chassis.
7. Connect PROFINET Cables: Connect standard Ethernet cables with RJ45 connectors from your PROFINET IO network to the available RJ45 ports on the module.
8. Power On: Reconnect the PC to the power supply and power it on.
9. Driver Installation: Install the necessary drivers and NCM PC software as required for the operating system to recognize and configure the CP 1616 card for PROFINET IO communication.