Bently Nevada 330102-00-52-10-02-00 3300 XL 8 mm Proximity Probe

Description

The 330102-00-52-10-02-00 is an 8 mm proximity probe configuration from the 3300 XL series, featuring an integrated armor for mechanical protection. This probe utilizes a 3/8-24 UNF thread, with Option 00 (0.0 in) unthreaded length and Option 52 (5.2 in) total case length. Engineered for reliable non-contact eddy-current displacement measurement, it is designed for use in critical rotating machinery applications to monitor shaft vibration and axial position.

This variant includes a 1.0 m total probe length (Option 10) and the standard miniature coaxial ClickLoc connector (Option 02) without a connector protector. As an armored probe (330102 series), it provides increased durability in harsh industrial environments where abrasion or mechanical damage to the cable is a concern. The system is designed to pair with 3300 XL Proximitor sensors and extension cables to complete the transducer monitoring chain.

Features

• 330102 Series: 8 mm proximity probe with integrated armor for enhanced cable protection.
• Thread Type: 3/8-24 UNF (standard for 3300 XL 8 mm series).
• Mechanical Configuration: 0.0 in unthreaded length (Option 00) and 5.2 in case length (Option 52).
• Total Length: 1.0 m system length (Option 10).
• Connector: Miniature coaxial ClickLoc connector (Option 02).
• Agency Approval: Not required (Option 00).

Applications

• Turbine and compressor shaft vibration monitoring
• Rotor axial position measurement
• Critical rotating machinery protection
• Industrial environments requiring armored cabling for mechanical robustness

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the probe is gapped according to the specific 3300 XL system manual. When installing, tighten the probe clamp bracket by hand or using appropriate tools as specified. For armored cables, ensure the bend radius is maintained to prevent damage to the armor or internal conductors. The system requires a Proximitor sensor matched to the total system length (probe + extension cable) for proper calibration.