Manufacturer: BECKHOFF
Product No.: C6525-0060
Country of origin:Германия
Product Type: Fanless Industrial PCs
Payment: T/T, Western Union
Weight: 7000g
Dimensions: 330 x 275 x 82 mm
Shipping port: Xiamen
Warranty: 12 months
Engineered for direct integration into control cabinet walls or back panels of control housings, the Beckhoff C6525-0060 provides high-performance, fanless industrial computing within demanding automation architectures. This compact industrial PC utilizes an external passive heat sink configuration that dissipates thermal loads outside the control enclosure, allowing the unit to maintain optimal processor speeds without active fan maintenance. Equipped with a 3.5-inch Beckhoff motherboard and powered by an Intel Celeron G3900TE dual-core processor, this IPC is optimized for control tasks using TwinCAT automation software.
| Specification Parameter | Value / Configuration |
|---|---|
| Manufacturer | Beckhoff Automation |
| Model Number | C6525-0060 |
| Processor Type | Intel Celeron G3900TE, 2.3 GHz, 2 Cores |
| TwinCAT Performance Level | TC2, TC3: 50 |
| Motherboard Format | 3.5-inch Industrial Motherboard |
| System Memory | 4 GB DDR4 RAM (Expandable up to 32 GB ex factory) |
| Standard Storage Media | 2.5-inch 320 GB Hard Disk Drive (SSD/CFast optional) |
| Storage Expansion Slots | 1 x 2.5-inch HDD/SSD slot, 1 x CFast slot |
| Power Supply | 24 V DC |
| Protection Rating (External) | IP65 (Outside the control cabinet) |
| Protection Rating (Internal) | IP20 (Inside the control cabinet) |
| Operating Temperature (External) | 0 to 45 degC |
| Operating Temperature (Internal) | 0 to 55 degC |
| Dimensions (W x H x D) | 330 x 275 x 82 mm (13 x 10.8 x 3.2 inches) |
| Basic Configuration Weight | 5.9 kg (13 lbs) |
| Shipping Weight (Calculated) | 7.0 kg (15.4 lbs) |
| Interface Type | Quantity & Physical Assignment |
|---|---|
| Ethernet Ports | 2 x 100/1000BASE-T on-board RJ45 ports |
| USB Interfaces | 4 x USB 3.0 Type-A ports |
| Serial Interface | 1 x RS232 (D-sub 9-pin) |
| Display Output | 1 x DVI-D connector |
| Power Input | 1 x 3-pin 24 V DC power connection block |
The C6525 series features highly modular motherboard configurations. While the base C6525-0060 is equipped with an Intel Celeron G3900TE processor (performance level 50), it can be customized or replaced with Intel Core i3, i5, or i7 options depending on the required TwinCAT real-time calculation power. Note that upgrading to higher-tier Core processors may increase the system's TwinCAT performance tier (from 50 up to 80), which requires a corresponding license update in your TwinCAT 3 runtime environment.
Because the passive cooling structure of this unit mounts through the wall of the enclosure, a minimum clearance of 20 cm (7.9 inches) of free space is strictly required around the external heat sink structure. Obstructions or installation in confined external secondary housings will lead to heat accumulation and automatic thermal throttling of the CPU. Ensure that the cabinet sealing gasket is fully compressed during installation to maintain the IP65 seal between the cabinet interior (IP20) and exterior (IP65) environments.
When using the dual on-board Gigabit Ethernet adapters for control, it is recommended to dedicate one port exclusively for the EtherCAT real-time network (using the Beckhoff Real-Time Ethernet driver) and the second port for standard TCP/IP communication (such as HMI, SCADA, or corporate networks). Avoid routing high-voltage power lines adjacent to the 24 V DC input feed to prevent electromagnetic interference from inducing faults in the on-board SATA controllers.
Isolate all 24 V DC power sources before starting the physical installation or cabling of the C6525-0060. High-voltage transients or hot-plugging electrical connections can permanently damage the on-board 3.5-inch motherboard components, CFast card interfaces, or connected peripheral devices. Ensure the cabinet cutout matches the unit's exact physical footprint before mounting.
Prepare a precise 330 mm x 275 mm cutout in the control cabinet back panel, ensuring the surrounding metal is clean, deburred, and flat.
Fit the industrial-grade sealing gasket around the mounting rim of the C6525 housing to secure the IP65 barrier between internal and external sections.
Insert the IPC from the inside of the cabinet, ensuring the heat sink protrudes fully to the outside, and secure all mounting clamps tightly.
Establish grounding connections to the chassis ground terminal and wire the nominal 24 V DC power input using high-quality copper conductors.
Глобална експресна доставка
Връщания и гаранция
Поръчките се обработват и доставят от понеделник до петък (с изключение на официалните празници).
За пълна информация относно допустимост, такси за презареждане и международни връщания, моля, разгледайте нашия официален Политика за възстановяване и връщане .
| Country of origin |
Германия
|
Тази статия обяснява как интегрираните електрически задвижвания, като серията e-Actuator на SMC, трансформират индустриалното управление на движението, като заменят традиционните пневматични и...
Тази статия обяснява как PLC системите изпълняват основни математически операции като събиране, изваждане, умножение, деление, модуло и степенуване в индустриалната автоматизация. Показва как тези...
Статията обяснява няколко усъвършенствани булеви логически функции, използвани в програмирането на PLC, извън основните операции AND, OR и NOT. Тя разглежда как инструменти като таблици на...
Булевата логика е основата на всяка програма за PLC. От прости машинни управления до сложни индустриални автоматизационни системи, логическите врати определят как контролерите реагират на променящите...
Индустриалните защитни стени играят ключова роля в киберсигурността на OT, като защитават мрежите PLC, DCS и SCADA чрез сегментация, контрол на входящия/изходящия трафик и интеграция на IDS/IPS в...
Съвременните роботизирани захвати се развиват отвъд традиционните механични челюсти. От системи с лепкави повърхности, вдъхновени от геконите, и меки захвати за хранителни продукти до инструменти за...
