Bently Nevada 149369-01 3500/25 Enhanced Keyphasor Module

Description

The 3500/25, engineered under upgraded spare part assembly component 149369-01, is a half-height, two-channel hardware instrument engineered to distribute precise timing signals to monitoring modules within a 3500 Machinery Protection System rack. The module conditions raw analog pulse waveforms acquired directly from proximity probes or passive magnetic pickups, converting them into digital phase references that signify the precise moment a physical shaft event marker coincides with the field transducer. Operating as a core measurement layer, it tracks once-per-turn or multiple-event-per-turn indices to enable adjacent rack monitors and external diagnostic instruments to compute shaft rotative speed along with vector parameters, including 1X vibration amplitude and phase angle. Formatted with complete backward compatibility to older sub-assemblies, the unit supports multi-channel correlation networks, allowing normal configurations of up to four independent inputs and paired layout mapping up to eight distinct Keyphasor variables across the internal backplane architecture.

Features

• Dual-channel high-accuracy phase and tracking processing executed within a half-height card structure.
• Full backward compatibility completely replacing legacy product hardware configurations and part number 125792-01.
• Wide input flexibility adapting dynamically to both magnetic pickups and eddy current proximity transducers.
• Non-volatile peak hold logic sustaining historic records of maximum forward and reverse rotative velocity.
• Short-circuit protected front-mounted coaxial connections supplying pure unconditioned transducer telemetry.

Applications

• Large multi-bearing utility steam turbine shaft phase angle determination and 1X vibration analysis.
• High-speed centrifugal compressor multi-shaft synchronicity alignment and rotor balance calculation.
• Critical safety-interlocked industrial turbo-expander rotative speed tracking and phase reference distribution.
• Distributed machinery network diagnostics integrating raw pulse telemetry into external transient data software.

Ordering Information

Technical Specifications

Connections/Interfaces

Installation Guidelines

• Shielding Control: Secure the field transmitter outer ground shields explicitly to the designated SHLD common connections on the rear I/O interface blocks to obstruct electromagnetic signal degradation.
• Slot Structuring: Ensure this half-height front module card is paired into a single vertical track with another half-height module or matching blank panel insert to keep internal rack structural support aligned.
• Sensor Limitations: Do not connect magnetic pickup sensors to channels tasked with tracking low shaft rotative speeds under 200 rpm, as the transducer cannot generate sufficient signal voltage amplitude for auto-threshold processing.
• Thermal Regulation: Prevent obstruction of ventilation openings located along the top and base plates of the 3500 instrumentation frame to sustain necessary passive airflow cooling across the processing chips.

Compliance and Certifications

• Low Voltage Standards: EN 61010-1 Safety requirements for electrical measurement and laboratory instrumentation.
• Electromagnetic Emissions: EN 61000-6-4 Industrial Radiated and Conducted Emissions, EN 55011 Class A limits.
• Electromagnetic Immunity: EN 61000-6-2 Industrial Susceptibility compliance parameters.
• Hazardous Location Codes: CSA Class I, Division 2, Groups A, B, C, and D ratings under option code 01.