Omron CJ1W-NC413 SYSMAC CJ Series Position Control Unit

Description

The Omron CJ1W-NC413 is a high-density, 4-axis position control module designed for integration with the Omron SYSMAC CJ-series PLC systems. Functioning as a high-speed Special I/O Unit, this module provides precise, open-loop multi-axis positioning via open-collector pulse train outputs. It enables seamless command execution and positioning profiles for stepping motor drivers and servo drives. Designed for demanding automated systems, the CJ1W-NC413 optimizes motion paths and high-speed feed rates while minimizing CPU processing overhead by handling motion profiles independently on the module.

Features

• Supports independent or coordinated control of up to 4 axes from a single PLC slot.
• Generates open-collector pulse train outputs suitable for stepping motors and servo drives.
• Features high-speed positioning operations with rapid pulse start times.
• Supports continuous positioning, interrupt feeding, and absolute/relative positioning sequences.
• Utilizes a high-density connector interface to minimize space within the control cabinet.

Applications

• Packaging machinery and automated labeling systems.
• Pick-and-place gantry systems and material handling systems.
• Assembly line automation and multi-axis indexing tables.
• Semiconductor manufacturing and electronic component insertion machinery.

Technical Specifications

Installation Guidelines

• Ensure the PLC rack power supply is completely switched off before mounting or removing the CJ1W-NC413 module.
• Connect the external 24V DC power supply specifically dedicated to the output circuit to protect against electrical noise and command signal degradation.
• Use shielded, twisted-pair cables for pulse train command lines and ground the shield at the drive end to mitigate electromagnetic interference (EMI).
• Maintain adequate clearance around the PLC rack to ensure proper convection cooling within the specified ambient temperature range of 0 to 55 degC.