Schneider Electric TSXASY800 Modicon Premium Analog Output Module

Only 7 item(s) left in stock

Manufacturer: Schneider Electric
Product No.: TSXASY800
Country of origin:Франция
Product Type: Analog Output Modules
Payment: T/T, Western Union
Weight: 500g
Dimensions: 15.20 x 12.70 x 5.10 cm
Shipping port: Xiamen
Warranty: 12 months

Providing high-density analog signal generation for precise process control, the Schneider Electric TSXASY800 integrates directly into Modicon Premium backplane architectures. This premium analog output module delivers eight individually configurable channels, allowing industrial operators to interface seamlessly with variable speed drives, control valves, actuators, and external instrumentation. Engineered for high-reliability environments, the module ensures stable signal conversion and robust isolation between channels and the internal bus.

Key Features

Eight Independent Channels: Individually configurable outputs maximize slot density and system flexibility.
Multirange Compatibility: Supports standard industrial voltage and current signal ranges on a per-channel basis.
Modicon Premium Integration: Direct bus connection with hot-swapping capabilities supported by compatible rack configurations.
High-Resolution Conversion: Ensures precise control loop execution with minimal signal drift over temperature variations.
LED Diagnostics: Front-panel status indicators provide rapid visual feedback on module health and channel faults.

Applications

Modulating Actuator Control: Positioning of dampers, control valves, and guide vanes in heavy industrial processes.
Speed Reference Distribution: Sending precise analog speed setpoints to variable frequency drives (VFDs).
Process Retransmission: Routing internal controller variables to analog chart recorders, panel meters, or legacy SCADA interfaces.
Water and Wastewater Treatment: Controlling chemical dosing pumps and flow-regulating valves.

Technical Specifications

Manufacturer	Schneider Electric
Model / SKU	TSXASY800
Product Series	Modicon Premium
Module Type	Analog Output Module
Number of Outputs	8
Output Range Types	Multirange (Voltage and Current)
Product Phase	Phase-Out (Legacy Support Available)
Commodity Code	85389091
Shipping Weight (Calculated)	0.50 kg
Package Dimensions (Calculated)	15.20 x 12.70 x 5.10 cm

Empirical Engineering Insights

Alternative Models & Compatibility

The TSXASY800 is native to the Modicon Premium platform and requires PL7 Pro or EcoStruxure Control Expert (formerly Unity Pro) for hardware catalog configuration. When migrating legacy systems to Modicon M580 architectures, this module cannot be directly inserted into Ethernet RIO (eX80) drops without a dedicated Premium-to-M580 upgrade adapter or complete I/O replacement.

Application Pitfalls & Engineering Notes

Ensure that the external 24VDC loop power supply is highly regulated and free of high-frequency noise. Common-mode voltage limits must be strictly observed; if the potential difference between channel grounds exceeds the module's isolation rating, cross-channel interference or hardware damage may occur. Always use external isolation barriers when routing signals to field devices with independent, ungrounded power systems.

Commissioning & Wiring Tips

Always use shielded twisted-pair (STP) cabling for all analog output connections. Ground the cable shields at the rack side only to prevent ground loops. When configuring the module in software, verify that unused channels are explicitly disabled or shorted to prevent floating channel errors and diagnostic LED faults.

Installation Guidelines

CRITICAL WARNING: HAZARD OF ELECTRIC SHOCK OR ARC FLASH

Disconnect all power sources supplying the PLC rack and external loop power before attempting to install, remove, or wire the TSXASY800 module. Verify that no residual voltage is present on the field wiring terminals. Failure to follow these safety protocols can result in severe equipment damage, personal injury, or death.

Ensure the rack power supply is switched off. Align the module with the target slot on the Modicon Premium backplane.

Gently slide the module into the slot guides until the rear connectors are fully seated in the backplane. Secure the module locking mechanism.

Connect the pre-wired terminal block to the front of the module, ensuring the locking screws or latches are fully engaged to prevent intermittent connections.

Apply power to the rack, download the hardware configuration from your programming environment, and verify that the module's RUN LED illuminates green.

Key Features:

#Analog Output Modules #Modicon Premium

What software is required to configure the TSXASY800 module?

The TSXASY800 is configured using PL7 Pro or EcoStruxure Control Expert (formerly Unity Pro), where each of the 8 channels can be individually set for voltage or current ranges.

Does the TSXASY800 require an external power supply for current loops?

Yes, an external 24VDC power supply is typically required to power the analog output loops, depending on the channel configuration and load impedance.

Can channels on the TSXASY800 be configured for different signal ranges simultaneously?

Yes, the TSXASY800 is a multirange module, allowing individual channel configuration for different voltage (e.g., +/-10V, 0-10V) or current (e.g., 4-20mA) ranges.

Глобална експресна доставка

Стандартна доставка: 4-6 работни дни чрез DHL, FedEx и UPS.
Експресна изпращане: Изпращане в същия ден за налични поръчки, направени преди 14:00 ч. (GMT+8).
Глобално покритие: Обслужваме над 150 държави, включително бърза доставка до Саудитска Арабия и ОАЕ.

Връщания и гаранция

30-дневна гаранция: Връщания се приемат за налични продукти в оригинална, фабрично запечатана опаковка.
12-месечна гаранция: Всеки индустриален компонент е подкрепен с нашата професионална техническа гаранция.

Поръчките се обработват и доставят от понеделник до петък (с изключение на официалните празници).

За пълна информация относно допустимост, такси за презареждане и международни връщания, моля, разгледайте нашия официален Политика за възстановяване и връщане .

TECHNICAL SPECIFICATIONS

Country of origin

Наскоро разгледани продукти

Технически знания

Electric Actuators Designed to Replace Fluids: Hands-on Tutorial

Електрически задвижващи механизми, проектирани да заменят хидравлични и пневматични системи: Практическо ръководство за индустриална автоматизация

Тази статия обяснява как интегрираните електрически задвижвания, като серията e-Actuator на SMC, трансформират индустриалното управление на движението, като заменят традиционните пневматични и...

23 юни 2026 г.

$Math Operations Using OpenPLC for Industrial Automation Applications$

Schneider Electric TSXASY800 Modicon Premium Analog Output Module