Siemens 6AV7260-1GA21-0BX0 SIMATIC IPC677D Panel PC

Description

This device is a Siemens 6AV7260-1GA21-0BX0 SIMATIC IPC677D, an industrial Panel PC designed for demanding automation environments. It features a 19-inch touchscreen display with a resolution of 1366 x 768 pixels and is powered by an Intel XEON E3-1268LV3 processor. The system is configured with 4 GB of DDR3 RAM, a 500 GB SATA HDD, and an onboard RAID controller for data integrity. Integrated monitoring for watchdog, temperature, and fan status ensures high operational reliability. Connectivity is provided through dual Gigabit Ethernet ports, multiple USB 3.0 interfaces, and a serial port.

Features

• 19-inch touchscreen display with 1366 x 768 resolution
• Intel XEON E3-1268LV3 processor (4C/8T, 2.3 GHz base, 3.3 GHz turbo)
• 4 GB DDR3 1600 DIMM system memory
• 500 GB SATA Hard Disk Drive for application and data storage
• Onboard RAID controller for enhanced data protection
• Integrated watchdog, temperature, and fan monitoring functions
• Dual 10/100/1000 Mbit/s Ethernet ports for network connectivity
• Pre-installed with Windows 7 Ultimate 64-bit SP1 (MUI)
• Front-accessible USB port for convenient peripheral connection

Applications

• Human-Machine Interface (HMI) for process visualization
• SCADA systems for plant-wide monitoring and control
• Data acquisition and logging stations
• Manufacturing Execution Systems (MES)
• Industrial control and computing platforms

Technical Specifications

Installation Guidelines

1. 1 Ensure the control cabinet or mounting location is de-energized and locked out according to safety procedures.
2. 2 Verify the panel cutout dimensions match the requirements for the IPC677D chassis. Prepare the mounting surface, ensuring it is clean and flat.
3. 3 Carefully insert the Panel PC into the cutout from the front. Secure the unit from the rear using all provided mounting clamps, tightening them evenly to the manufacturer's specified torque to ensure a proper seal.
4. 4 Connect a protective earth (PE) conductor to the designated grounding terminal on the chassis. Ensure a low-impedance connection to the main cabinet ground.
5. 5 Connect the AC 110/230V power supply cable to the unit's power input connector. Ensure the power cable is properly secured.
6. 6 Connect all required peripheral and communication cables, such as Ethernet, USB, and serial devices. Route cables neatly and avoid sharp bends or proximity to high-voltage lines.
7. 7 After verifying all connections are secure, remove the lockout/tagout and re-energize the cabinet. Power on the Panel PC and confirm that the operating system boots correctly.