Siemens 6AV7260-1GM41-0BA3 SIMATIC IPC677D Panel PC

Description

The Siemens 6AV7260-1GM41-0BA3 is a SIMATIC IPC677D Panel PC designed for demanding industrial applications. This unit features a 19-inch touchscreen display with a resolution of 1366x768 and is powered by an Intel XEON E3-1268LV3 processor. It is configured with 16 GB of DDR3 RAM and a 240 GB solid-state drive for robust performance and data storage. Connectivity options include dual Gigabit Ethernet ports, four USB 3.0 ports, and a serial COM port. The system incorporates an onboard RAID controller and integrated monitoring for watchdog, temperature, and fan status, ensuring high reliability. It comes pre-installed with Windows 7 Ultimate 64-bit and includes the SIMATIC IPC DiagMonitor software.

Features

• 19-inch touchscreen display (1366x768 resolution)
• Intel XEON E3-1268LV3 processor (4C/8T, 2.3 GHz base, 3.3 GHz turbo)
• 16 GB DDR3 1600 DIMM RAM
• 240 GB solid-state drive (SSD)
• Onboard RAID controller for data redundancy
• Integrated monitoring for watchdog, temperature, and fan
• Dual 10/100/1000 Mbit/s Ethernet ports
• Pre-installed Windows 7 Ultimate 64-bit SP1 (MUI)

Applications

• Human-Machine Interface (HMI) for process visualization
• SCADA systems for plant-wide monitoring and control
• Data acquisition and logging in industrial environments
• Manufacturing Execution Systems (MES) integration

Technical Specifications

Installation Guidelines

1. 1 Verify the panel cutout dimensions match the unit's requirements. Secure the Panel PC into the enclosure using all provided mounting clamps to ensure a proper seal and mechanical stability.
2. 2 Connect the main protective earth (PE) terminal to the facility's grounding system using a low-impedance conductor of appropriate gauge. This is critical for safety and noise immunity.
3. 3 Connect the AC power supply using the provided cable. Ensure the source voltage (110/230V AC) matches the power supply unit's rating. Route power cables separately from signal and communication cables to prevent electromagnetic interference.
4. 4 Connect Ethernet, USB, and serial devices as required. Use shielded cables for all communication lines and ensure shields are properly terminated at one end to the system ground.
5. 5 Ensure adequate ventilation clearance around the rear of the unit to allow for proper heat dissipation. Do not block fan vents. After all connections are secure, remove LOTO and apply power to the unit.