Siemens 6AV7612-0AA30-0BE0 SIMATIC Panel PC 670

Description

This is the Siemens 6AV7612-0AA30-0BE0, a SIMATIC Panel PC 670 designed for industrial automation and visualization applications. This unit integrates a computer and operator interface into a single device, featuring a 12-inch TFT touch display for direct machine control and monitoring. The standard configuration includes a Celeron 300 MHz CPU, 256 MB of RAM, and a 20 GB hard drive. It is engineered to operate on a 115-230V AC power supply and is supplied with a U.S. mains cable. This specific model comes with a pre-installed German language version of the Windows 98 operating system.

Features

• 12-inch TFT color touch display
• Integrated Celeron 300 MHz processor
• 256 MB of installed RAM
• 20 GB internal hard drive storage
• Wide input voltage range of 115-230V AC
• Pre-installed with Windows 98 (German language)

Applications

• Machine-level data acquisition and control
• Process visualization and HMI tasks
• Factory automation and manufacturing execution systems (MES)
• Industrial control panel integration

Technical Specifications

Installation Guidelines

1.  1 Verify the enclosure or panel has a cutout that matches the Panel PC's required mounting dimensions. Ensure the mounting surface is clean, flat, and free of debris.
2.  2 Insert the Panel PC into the cutout from the front of the enclosure. Secure the unit from the rear using the provided mounting clamps, tightening them evenly to ensure a proper seal against the panel gasket.
3.  3 Connect a protective earth (PE) conductor to the designated grounding terminal on the PC chassis. This connection is critical for safety and noise immunity.
4.  4 Connect the 115-230V AC power supply using the provided U.S. mains cable to the power input connector. Ensure the source voltage matches the device rating.
5.  5 Connect all necessary communication cables (e.g., Ethernet, serial) and any peripheral devices.
6.  6 After verifying all connections are secure, remove the LOTO device and re-energize the main cabinet. Power on the Panel PC and confirm proper boot-up and operation.