Siemens 6AV7724-2AC10-0AA0 SIMATIC Panel PC 670

Description

This is a Siemens 6AV7724-2AC10-0AA0, a standard configuration of the SIMATIC PANEL PC 670 series. It is an industrial-grade panel computer designed for HMI and control applications. This unit features a 15.1-inch color TFT touchscreen display, a 1.2 GHz Celeron processor, and 256 MB of SDRAM-133 memory. For storage, it includes a 40 GB EIDE hard disk drive and a DVD-ROM drive. The integrated power supply is rated for 115-230V AC and is supplied with a European mains cable. This model is delivered without a pre-installed operating system, allowing for custom software deployment.

Features

• 15.1-inch Color TFT Display with Touchscreen
• Intel Celeron 1.2 GHz Processor
• 256 MB SDRAM-133 System Memory
• 40 GB EIDE Hard Disk Drive
• Integrated DVD-ROM Optical Drive
• Wide-range 115-230V AC Power Supply
• Supplied without an Operating System

Applications

• Human-Machine Interface (HMI) for process visualization
• Supervisory control and data acquisition (SCADA) nodes
• Machine-level control and monitoring in manufacturing
• Industrial data logging and reporting stations

Technical Specifications

Installation Guidelines

1. 1 Ensure the control cabinet is fully de-energized and locked out. Verify the absence of voltage using a calibrated multimeter before proceeding.
2. 2 Verify the panel cutout dimensions match the PC 670's mounting requirements. Ensure the mounting surface is clean, flat, and can support the unit's weight (12.00 kg).
3. 3 Insert the Panel PC into the cutout and secure it evenly using all provided mounting clamps. Do not overtighten, as this can warp the bezel.
4. 4 Connect a low-impedance protective earth (PE) conductor to the designated chassis ground terminal. This is a critical safety connection.
5. 5 Connect the AC power supply cable to a properly rated and protected power source. Ensure the source voltage matches the 115-230V AC rating.
6. 6 Connect all required peripheral and communication cables (e.g., Ethernet, USB, serial). Ensure proper cable strain relief and routing to prevent damage.
7. 7 After a final inspection of all connections, remove LOTO devices and re-energize the cabinet to commission the unit.