Siemens 6AV7881-4AE00-8DF0 SIMATIC IPC277D Nanopanel PC

Description

The Siemens 6AV7881-4AE00-8DF0 is a SIMATIC IPC277D Nanopanel PC designed for demanding visualization and control tasks in industrial environments. This unit features a 15-inch TFT touch display, an Intel ATOM E660 1.3 GHz processor, and 2 GB of RAM for reliable performance. It is equipped with an 80 GB SATA Solid-State Drive (SSD) pre-loaded with Windows Embedded Standard 7 SP1 and a comprehensive Siemens WinCC Advanced RT software package, making it a ready-to-deploy HMI solution. Connectivity is provided through dual Gigabit Ethernet ports, multiple high-current USB 2.0 ports, and a serial interface.

Features

• 15-inch TFT color display with touch functionality
• Intel ATOM E660 processor operating at 1.3 GHz
• 2 GB of main memory (RAM)
• 80 GB SATA Solid-State Drive for storage
• Pre-installed Windows Embedded Standard 7 SP1 (WES 7 SP1)
• Includes WinCC Advanced RT V13 (128 PowerTags) and a WinCC RT Advanced V14 license
• Dual 10/100/1000 Mbps Ethernet RJ45 ports
• Integrated front-panel USB port for convenient access
• Three rear high-current USB 2.0 ports and one serial (COM1) port
• Operates on a 24 V DC power supply

Applications

• Human-Machine Interface (HMI) for machine-level control
• Process visualization and data acquisition stations
• Small-scale SCADA client applications
• Data logging and recipe management in manufacturing
• Gateway and communication controller for industrial networks

Technical Specifications

Installation Guidelines

1. 1 Verify Panel Cutout: Before mounting, confirm that the panel cutout dimensions match the IPC277D's specifications to ensure a proper fit and environmental seal. Clean the mounting surface of any debris or oil.
2. 2 Mount and Secure: Insert the Panel PC into the cutout from the front. Secure it from the rear using the provided mounting clamps. Tighten the clamps evenly in a cross-pattern to the specified torque to ensure the gasket is compressed uniformly.
3. 3 Establish Ground Connection: Connect the functional earth (FE) terminal on the IPC chassis to the cabinet's main ground point using a low-impedance, short-gauge wire. A proper ground connection is critical for noise immunity and operator safety.
4. 4 Connect Power Supply: Connect the 24 V DC power source to the designated power terminals. Verify correct polarity (+/-) before energizing the circuit. Use appropriately sized wiring and ensure the power supply is stable and filtered.
5. 5 Connect Peripherals: Connect Ethernet, USB, and serial cables as required. Route all data cables separately from high-voltage power lines to prevent electromagnetic interference (EMI). Secure all connectors firmly.