Siemens 6AV7893-0AE10-0BC0 SIMATIC IPC677C Panel PC

Description

This is a Siemens 6AV7893-0AE10-0BC0 SIMATIC HMI IPC677C, an industrial Panel PC designed for demanding visualization and control tasks. It features a 15-inch keypad display with a 1024x768 resolution and is powered by an Intel Core i3-330E processor. The unit is equipped with extensive connectivity options, including dual Gigabit Ethernet, PROFIBUS/MPI, and multiple USB ports. Integrated monitoring functions for watchdog, temperature, and fan status ensure high operational reliability. This Panel PC operates on a 24 V DC power supply and comes pre-installed with Windows 7 Ultimate.

Features

• 15-inch display with integrated keypad for operator input.
• Front-side USB interface for convenient data access.
• Onboard RAID controller for enhanced data integrity.
• Integrated watchdog, temperature, and fan monitoring for system stability.
• PROFIBUS/MPI interface (CP 5611-A2 compatible) for fieldbus communication.
• PCI and PCIe (x16) expansion slots for additional hardware.
• Robust design suitable for industrial environments.

Applications

• Human-Machine Interface (HMI) for process visualization.
• Machine control and data acquisition systems.
• Manufacturing Execution Systems (MES) terminals.
• Industrial automation and plant floor control panels.
• Supervisory Control and Data Acquisition (SCADA) nodes.

Technical Specifications

Installation Guidelines

1. 1 Verify that the control cabinet or panel cutout dimensions match the IPC677C's mounting requirements. Ensure adequate clearance for ventilation and cable routing.
2. 2 Insert the Panel PC into the cutout from the front of the panel. Secure it from the rear using all provided mounting clamps, tightening them evenly to the manufacturer's specified torque to ensure a proper seal.
3. 3 Connect a low-impedance protective earth (PE) ground wire to the designated grounding terminal on the PC chassis. This is essential for safety and noise immunity.
4. 4 Connect the 24 V DC power supply to the power input connector, ensuring correct polarity. Use appropriately sized wiring and ensure the power source is stable and within the specified voltage range.
5. 5 Connect Ethernet, PROFIBUS/MPI, USB, and any other required communication cables. Route cables neatly, avoiding sharp bends and proximity to high-voltage power lines to prevent interference.
6. 6 After all connections are secure and the panel is closed, remove the LOTO device and re-apply power to the cabinet to commission the Panel PC.