Siemens 6ES7647-7BA10-3MX0 SIMATIC IPC427C Microbox PC

Description

The Siemens 6ES7647-7BA10-3MX0 is a compact, fanless industrial computer from the SIMATIC IPC427C series. This Microbox PC is engineered for control, visualization, and data acquisition tasks in demanding industrial environments. It is equipped with a Celeron M 1.2 GHz processor, 512 MB of DDR3 RAM, and dual CompactFlash storage drives. This specific configuration is delivered without a pre-installed operating system, providing flexibility for custom software deployments.

Features

• Processor: Celeron M operating at 1.2 GHz with an 800 MHz Front Side Bus (FSB).
• Memory: 512 MB DDR3 1066 SODIMM module.
• Primary Storage: 4 GB user-accessible and replaceable CompactFlash card.
• Internal Storage: 256 MB non-accessible internal CompactFlash card.
• Expansion: Base model without additional hardware expansions.
• Operating System: Supplied without an OS for custom system integration.
• Product Lifecycle Status: Designated as a Phase-Out product.

Applications

• Human-Machine Interface (HMI) systems
• Data logging and gateway applications
• Machine-level control and automation tasks
• Embedded control systems in manufacturing
• Process visualization and monitoring

Technical Specifications

Installation Guidelines

1. 1 Mounting: Securely mount the IPC427C to a stable, vibration-free surface within a control cabinet or enclosure. Ensure adequate clearance around the unit for ventilation and cable access.
2. 2 Grounding: Connect the chassis ground terminal to the main protective earth (PE) busbar of the control panel using a low-impedance conductor. A proper ground connection is essential for safety and noise immunity.
3. 3 Power Connection: Connect a stable, filtered DC power supply to the designated power input terminals. Verify the voltage is within the specified range for the device before energizing.
4. 4 I/O and Network Cabling: Route all communication and I/O cables separately from high-voltage power lines to prevent electromagnetic interference. Use shielded cables for all network connections and ensure shields are properly terminated.
5. 5 Initial Power-Up: After all connections are verified, remove LOTO and apply power to the unit. The device will begin its boot sequence. Connect a monitor and keyboard for initial software installation and configuration.