Siemens 6ES7715-1DD20-0AE3 SIMATIC Field PG M3 Programming Device

Description

The Siemens 6ES7715-1DD20-0AE3 is a SIMATIC Field PG M3 Premium model, a ruggedized portable programmer designed for commissioning, servicing, and maintaining industrial automation systems. This unit is equipped with an Intel Core i5-520M processor, a 300 GB S-ATA Solid State Drive (SSD) for enhanced performance, and 3 GB of DDR3 RAM. It features a 15.6-inch Full HD display and comes pre-loaded with Windows XP Professional and a suite of SIMATIC engineering software, including STEP 7 Professional V11 and WinCC Advanced V11. This specific configuration is supplied without an S5 interface or S5-EPROMMER, targeting modern SIMATIC control systems. An MPI cable is included for direct connection to automation hardware.

Features

• Intel Core i5-520M processor operating at 2.4 GHz.
• Fast system boot and application loading with a 300 GB SSD.
• High-resolution 15.6-inch Full HD display (1920 x 1080).
• Pre-installed licenses for STEP 7 Professional V11, WinCC Advanced V11, and STEP 7 Micro/WIN.
• Includes DL Multi-Standard DVD RW optical drive.
• QWERTY keyboard with German layout.
• Supplied with an MPI interface cable for PLC communication.

Applications

• Commissioning of PLC, HMI, and drive systems.
• On-site diagnostics and troubleshooting of industrial machinery.
• Program development, modification, and backup in field environments.
• Plant maintenance and service engineering tasks.

Technical Specifications

Installation Guidelines

1. 1 Carefully unpack the Field PG and inspect for any signs of shipping damage. Verify that the part number on the device matches the order.
2. 2 Select the appropriate line cable from the supplied set that matches the power outlet for your region. Connect it securely to the Field PG's power adapter and to a grounded mains socket.
3. 3 Power on the device. Follow the on-screen prompts for the initial Windows XP setup if it has not been previously configured.
4. 4 Launch the SIMATIC software (e.g., STEP 7 Manager) to verify that the pre-installed licenses are active and the software is ready for use.
5. 5 Use the included MPI cable to establish a connection with the target PLC or automation device. Configure the communication interface settings within the PG/PC settings of the SIMATIC software.