Siemens 6ES7716-2BA11-0BB4 SIMATIC Field PG M4 Industrial Programming Device

Description

This Siemens 6ES7716-2BA11-0BB4 is a SIMATIC Field PG M4 Premium Plus, a ruggedized industrial programming device designed for commissioning, servicing, and maintaining automation systems. It is equipped with an Intel Core i7-35X0M processor, 8 GB RAM, and a 1 TB HDD for demanding engineering tasks. The unit features a 15.6-inch Full HD display and comes pre-installed with Windows 7 Ultimate SP1 (64-bit). This configuration includes combo licenses for STEP 7 Professional, WinCC Advanced, and STEP 7 Micro/WIN, along with an MPI cable for direct PLC connectivity. This model is supplied without an S5 interface or S5-EPROMMER.

Features

• Powered by an Intel Core i7-35X0M processor with Turbo Boost technology up to 3.6 GHz.
• Features a 15.6-inch Full HD (1920x1080) widescreen display for detailed visualization.
• Equipped with 8 GB of RAM and a 1 TB SATA hard disk drive.
• Pre-installed with Windows 7 Ultimate SP1 (64-bit) with multi-language support.
• Includes combo licenses for STEP 7 Professional, WinCC Advanced, and STEP 7 Micro/WIN.
• Built-in DVD RW optical drive for software installation and data backup.
• Supplied with a UK power supply cable and an MPI interface cable.

Applications

• PLC and HMI programming and configuration in industrial environments.
• On-site commissioning and startup of automation systems.
• Field-level diagnostics, troubleshooting, and system maintenance.
• Mobile engineering workstation for control engineers and technicians.

Technical Specifications

Installation Guidelines

1. 1 Upon receipt, carefully inspect the Field PG and its accessories for any signs of physical damage incurred during transit. Report any damage immediately.
2. 2 Connect the provided UK power supply cable to the Field PG and plug it into a stable, properly grounded AC power source. Avoid using ungrounded outlets or extension cords.
3. 3 Power on the device and allow the Windows 7 operating system to load completely. Complete any initial system setup prompts if this is the first use.
4. 4 Launch the "Automation License Manager" to verify the status of the pre-installed software licenses (STEP 7, WinCC, etc.). Transfer licenses if required, following Siemens procedures.
5. 5 For PLC communication, use the included MPI cable to connect the Field PG's serial port to the MPI port of the target SIMATIC controller. Configure the communication interface settings within the TIA Portal or SIMATIC Manager software.
6. 6 Always operate the Field PG on a clean, level, and stable surface to ensure proper ventilation and prevent accidental drops or impacts common in industrial settings.